Overview
Powerslide Reign Triton 80 Skates. The Triton returns with the super light (SL) Ego frames. Take control of the hockey game, or the streets, with Trinity mount boots and frames that position the skate perfectly under the foot. Trinity three-point mounting is winged under the ball of the foot, creating a channel for the wheels to lower the skate height. Together it adds stability and power.
Dual-density Trident wheels (80mm 75A) and Wicked ABEC7 bearings are indoor rink ready. If skating outdoors, the wheels will feel great but may wear quickly due to the grip. Ego SL frames are light, strong (extruded aluminum), and responsive. At just 9.6" in length (axle to axle), agility is high. The frames are adjustable both side to side AND front to back. This allows correction of ankle roll, to tweak to preference, or be removed altogether! Triton boots are compatible with any trinity mount frame from Powerslide should you want to change wheel configuration. Ego SL frames are compatible with the Powerslide Urban Brake SM.
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. |
| BOOTS | Reign |
|---|---|
| Construction | Fiberglass Reinforced Composite Shell Nano Leather, Polyurethane-Leather, Leather |
| Cuff | Medium |
| Liners | Built-in Recall Memory Fit Antislip Microfiber Lining |
| Footbeds | Optional Removable Footbeds Included |
| Heat Moldable | Yes (175F) |
| Closures | Lightly Waxed Laces |
| Mounting | Trinity |
| FRAMES | Powerslide EGO SL |
|---|---|
| Material | CNC Machined and Extruded 6061 Aircraft Aluminum |
| Mounting | Trinity |
| Length | 9.6" or 243mm |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 4x80mm |
| Max Wheel Size | 80mm |
| Axles | One-Piece 8mm, Torx |
| COMPONENTS | |
|---|---|
| Wheels | Powerslide Trident 80mm XGRIP (Indoor Wheels - Approximately 75A) |
| Bearings | Wicked ABEC7 (Standard 608) |
| Brake | Not Included Compatible with Powerslide HABS Brake Mount SM/MD. |
| Axle for Brake Removal | Not Included |
| Skate Tool | Torx Tool - Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 120024 |
| Time | 2 Years |
| Contact | Inline Warehouse |
| Country of Origin | China (Wheels are from the U.S.) |
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. |
| Reign Triton 80 Size | CM | EU |
|---|---|---|
| 6.0 | 24.2 | 38 |
| 7.0 | 24.8 | 39 |
| 7.5 | 25.5 | 40 |
| 8.0 | 26.1 | 41 |
| 9.0 | 26.8 | 42 |
| 10.0 | 27.5 | 43 |
| 10.5 | 28.2 | 44 |
| 11.0 | 28.9 | 45 |
| 12.0 | 29.6 | 46 |
| 12.5 | 30.3 | 47 |
Previous Feedback
Jake Oklahoma
Date: 7/3/20