This Item Ships For Free!
Shop All Powerslide
Powerslide Swell Lite 100
Skates - Black
5.0
Overview
The Powerslide Swell Lite 100 Skates in Black are the latest of the Swell collection. The Myfit Lite Dual Sized Liners are removable and have a monowrap for even greater comfort. They were made to be more affordable without lacking a few main qualities of the other Swell models. The boots are anatomically shaped with light and durable glass-fiber reinforced plastic shells. The cuff sets high and is adjustable so that you can get personalized support.
Go fast on Powerslide's Swell 3x100mm/83A wheels with Wicked ABEC 7 bearings. The stable aluminum cast frames will keep your center of gravity low with trinity mounting. Lastly, the height-adjustable brakes will last longer due to their customizability and will perform to your needs.
| Model Year | 2022 |
|---|---|
| Skate Type | Recreational, Cross-Training |
| Skill Level | Intermediate and Better |
| Weight | 1400g (US 7.5-8.0 EU 40-41) |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. | |
| HABS Height Adjustable Brake System An easy and secure brake that allows for the brake pad to adjust up and down to prolong the life of the rubber. A rear axle that is threaded at both ends allows for installation and removal of the brake with four outer screws that eliminate having to remove the axle or wheel. | |
| 3D Casted Frames Perfectly shaped around the wheels to optimize the space. 3D construction enhances stiffness and power transfer to offer characteristics similar to those found in CNC machined frames. To learn more about the swell models click here! |
| BOOTS | |
|---|---|
| Construction | Glass-Fiber Reinforced Plastic |
| Cuff | Standard |
| Liners | MyFit Lite Dual-Size |
| Heat Moldable | Yes |
| Closures | Cuff Buckle 45 Degree Power Strap Standard Lacing |
| Mounting | Trinity |
| FRAMES | |
|---|---|
| Material | ADC10 Aluminum |
| Mounting | Trinity |
| Length | 9.8" Axle to Axle (250mm) |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 3x100mm |
| Max Wheel Size | 100mm |
| Axles | One-Piece 8mm |
| COMPONENTS | |
|---|---|
| Wheels | Swell 100mm 83A |
| Bearings | Wicked ABEC7 608 |
| Brake | Included HABS S/M (907031) |
| Axle for Brake Removal | Included |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 510055 |
| Time | 2 Years |
| Contact | Inline Warehouse |
| Country of Origin | China |
Videos
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| FIT GUIDELINES: Use foot measurement for the most precise fit. Add .5cm to the measurement for extra room at the toe or if wider feet. Not true to size! |
| Size | CM | EU |
|---|---|---|
| 5.0 - 5.5 | 22.9 - 23.6 | 36 - 37 |
| 6.0 - 7.0 | 24.2 - 24.8 | 38 - 39 |
| 7.5 - 8.0 | 25.5 - 26.1 | 40 - 41 |
| 9.0 - 10.0 | 26.9 - 27.5 | 42 - 43 |
| 10.5 - 11.0 | 28.2 - 28.9 | 44 - 45 |
| 12.0 - 12.5 | 29.6 - 30.3 | 46 - 47 |
Other Items to Consider
Similar Items
Customer Reviews
My favorite brand and modelPowerSlide Swell is my favorite brand, model. On my 4th pair but bought this pair for my daughter to introduce her to 3 wheel larger wheel. She LOVES them!! Great skate and Inline Warehouse is excellent!! Great service as always.
Great skateVery nice and comfortable fast skate with a lot of support.
