Overview
The Powerslide Swell 100 Skates - Citrus are a pop of fresh air with an energetic orange look that we love! They are a cross-training or intense fitness skaters dream with quality elements all around.
The Recall memory foam inside feels amazing to the touch and stays comfortable on long rides with standard lacing, velcro straps, and cuff buckles that hold you in place. The boots are made of a hand-lasted hybrid composite that gives it a very natural fit. Down below they have Trinity 3-point mounted frames, made of 3D-casted ADC10 aluminum. They hold 3x100mm Undercover Raw Wheels with an 85A hardness and Wicked ABEC9 bearings inside. Trinity mounting keeps you lower to the ground with a winged mounting structure under the ball of the foot that creates a channel for the wheels. This gives you so much more stability and confidence while skating.
| Model Year | 2024 |
|---|---|
| Skate Type | Cross-Training |
| Skill Level | Intermediate and Better |
| Weight | 1500g (US 8.0 EU 41) |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. | |
| 3D Casted Frames Perfectly shaped around the wheels to optimize the space. 3D construction enhances stiffness and power transfer to offer characteristics similar to those found in CNC machined frames. |
| BOOTS | |
|---|---|
| Construction | Hybrid Composite Hand Lasted TPU Materials |
| Cuff | Height Adjustable Spacers |
| Liners | Fixed Liner Recall Memory Foam Padding |
| Heat Moldable | Yes |
| Closures | Cuff Buckle 45° Velcro Strap Standard Lacing |
| Mounting | Trinity X (Front to Back and Lateral Adjustment) |
| FRAMES | Powerslide Elite |
|---|---|
| Material | ADC10 Aluminum - 3D Casted |
| Mounting | Trinity |
| Length | 9.1” Axle to Axle (231mm) 9.8” Axle to Axle (250mm) |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 3x100mm |
| Max Wheel Size | 100mm |
| Axles | One-Piece 8mm, T25 Torx (520020) |
| COMPONENTS | |
|---|---|
| Wheels | Undercover Raw 100mm 85A |
| Bearings | Wicked ABEC9 |
| Brake | Included HABS S/M (907031) |
| Axle for Brake Removal | Included and Installed (940427) Right Rear Axle is Threaded at Both Ends |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 510066 |
| Time | 2 Years |
| Contact | Inline Warehouse |
| Country of Origin | China |
Videos
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. |
| Swell Size | CM | EU |
|---|---|---|
| 6.0 | 24.2 | 38 |
| 7.0 | 24.8 | 39 |
| 7.5 | 25.5 | 40 |
| 8.0 | 26.1 | 41 |
| 9.0 | 26.8 | 42 |
| 10.0 | 27.5 | 43 |
| 10.5 | 28.2 | 44 |
| 11.0 | 28.9 | 45 |
| 12.0 | 29.6 | 46 |
| 12.5 | 30.3 | 47 |
