Overview
The Powerslide Swell 100 Skates - Judit Pro are a rare pro-model for a team rider that has taught us all Rollerobics! Judit is a roller-workout enthusiast who created skating workouts for all to enjoy, we have a guide featuring her Rollerobics if you would like to learn more, please check it out! The boot is made with a hybrid composite lightweight glass-fiber reinforced plastic that is hand lasted with removable MyFit Prime Liners. There is a supportive height-adjustable cuff for stability with cuff buckles, 45-degree velcro straps and standard lacing to hold your feet in place.
Trinity mounting brings the center of gravity lower for stability, even in 3x100mm wheels. The shape of the mounting combined with 3D-casted Powerslide Elite Frames creates a channel for the wheels with a winged mount under the ball of the foot. ADC10 grade aluminum in the frames make them reliable strong. They hold 100mm 83A Wheels with Wicked ABEC9 Bearings inside and a HABS (height adjustable braking system) brake attached to one boot.
| Model Year | 2025 |
|---|---|
| Skate Type | Cross-Training |
| Skill Level | Intermediate and Better |
| Weight | TBD |
| Sizing Tip | Unisex model based on US Men's sizing |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. | |
| HABS Height Adjustable Brake System An easy and secure brake that allows for the brake pad to adjust up and down to prolong the life of the rubber. A rear axle that is threaded at both ends allows for installation and removal of the brake with four outer screws that eliminate having to remove the axle or wheel. | |
| 3D Casted Frames Perfectly shaped around the wheels to optimize the space. 3D construction enhances stiffness and power transfer to offer characteristics similar to those found in CNC machined frames. |
| BOOTS | |
|---|---|
| Construction | Lightweight Glass-Fiber Reinforced Plastic |
| Cuff | Height Adjustable Spacers |
| Liners | Removable MyFit Prime Liners |
| Heat Moldable | Yes |
| Closures | Cuff Buckle 45° Velcro Strap Standard Lacing |
| Mounting | Trinity X (Front to Back and Lateral Adjustment) |
| FRAMES | Powerslide Elite |
|---|---|
| Material | Aluminum - 3D Casted |
| Mounting | Trinity |
| Length | 9.1" Axle to Axle (231mm) EU38-EU42 9.8" Axle to Axle (250mm) EU43-EU47 |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 3x100mm |
| Max Wheel Size | 100mm |
| Axles | One-Piece 8mm, T25 Torx (520020) |
| COMPONENTS | |
|---|---|
| Wheels | Powerslide Swell 100mm 83A |
| Bearings | Wicked ABEC9 |
| Brake | Included HABS S/M (907031) |
| Axle for Brake Removal | Included and Installed (940427) Right Rear Axle is Threaded at Both Ends |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 510061 |
| Time | 2 Years |
| Contact | Inline Warehouse |
| Country of Origin | China |
Sizing Chart
| GENERAL INLINE SKATE SIZING GUIDELINES | |
|---|---|
| Measure feet with socks on and then reference the model-specific sizing chart. How to Measure Your Feet for Skates How to Try on Skates for Fit How to Choose an Inline Skate |
| POWERSLIDE SWELL INLINE SKATE SIZING CHART | ||||
|---|---|---|---|---|
SWELL | CM | US Men's | US Women's | EU |
| 6.0 | 24.2 | 6.0 | 7.0 | 38 |
| 7.0 | 24.8 | 7.0 | 8.0 | 39 |
| 7.5 | 25.5 | 7.5 | 8.5 | 40 |
| 8.0 | 26.1 | 8.0 | 9.0 | 41 |
| 9.0 | 26.8 | 9.0 | 10.0 | 42 |
| 10.0 | 27.5 | 10.0 | 11.0 | 43 |
| 10.5 | 28.2 | 10.5 | 11.5 | 44 |
| 11.0 | 28.9 | 11.0 | 45 | |
| 12.0 | 29.6 | 12.0 | 46 | |
| 12.5 | 30.3 | 12.5 | 47 | |
