Powerslide Phuzion Radon 90
Overview
The Powerslide Phuzion Radon 90 Bronze Inline Skates for Women are stylish, smooth, and comfortable. They have integrated bronze or rather maroon-colored liners with EVA foam and anatomical padding for a comfortable fit with little to no break-in. The uppers are a combination of a soft boot with TPU welded reinforcements. The shell emphasizes support on the heel and there is a layer of nylon on the soft boot of the skate to better help against abrasion.
With a short tri-skate frame, they are easy to maneuver and highly agile. The Powerslide Elite Cast Aluminum frames are a nice rose gold color. With Trinity X mounting, they are adjustable both laterally and from front to back. The boots are compatible with any trinity mount frame from Powerslide should you want to change wheel configuration later on. The frames can handle up to 100mm wheels but they come with Powerslide Phuzion 90mm 85A Wheels and Wicked ABEC7 Bearings. The height-adjustable brake system (HABS) allows you to grind that brake pad all the way down and is easily replaceable for when you do!
Model Year | 2022 |
---|---|
Skate Type | Recreational, Cross-Training |
Skill Level | Intermediate |
Weight | 1340g (US 9.0 EU 41) |
Specifications
KEY TECHNOLOGIES | |
---|---|
Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. | |
HABS Height Adjustable Brake System An easy and secure brake that allows for the brake pad to adjust up and down to prolong the life of the rubber. A rear axle that is threaded at both ends allows for the installation and removal of the brake with four outer screws that eliminate having to remove the axle or wheel. |
BOOTS | |
---|---|
Construction | Glass-Fiber Reinforced Plastic |
Cuff | Standard |
Liners | Fixed with EVA Padding |
Heat Moldable | No |
Closures | Cuff Buckle 45° Velcro Power Strap Standard Lacing |
Mounting | Trinity X |
FRAMES | Powerslide Elite |
---|---|
Material | Elite Casted Aluminum |
Mounting | Trinity |
Length | Size US 6.0-7.0 EU 36-37- 8.1” Axle to Axle (205mm) Sizes US 8.0 EU 38 and Larger 9.1” Axle to Axle (231mm) |
Removable | Yes |
Adjustable | Yes |
Stock Wheel Setup | 3x90mm |
Max Wheel Size | 100mm |
Axles | One-Piece 8mm, 520020 |
COMPONENTS | |
---|---|
Wheels | Phuzion 90mm 83A |
Bearings | Wicked ABEC7 |
Brake | Included HABS S/M (907031) |
Axle for Brake Removal | Included |
Skate Tool | Included |
MANUFACTURER and WARRANTY INFORMATION | |
---|---|
Model Number | 940694 |
Time | 2 Years |
Contact | Inline Warehouse |
Country of Origin | China |
Videos
Sizing Chart
GENERAL SKATE SIZING GUIDELINES | |
---|---|
Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
FIT GUIDELINES: Use foot measurement for the most precise fit. Add .5cm to the measurement for extra room at the toe or if wider feet. Shown in Women's Sizing but is considered a Unisex model. |
Radon Size | CM | EU |
---|---|---|
6.0 | 22.9 | 36 |
6.5 | 23.6 | 37 |
7.0 | 24.2 | 38 |
8.0 | 24.8 | 39 |
8.5 | 25.5 | 40 |
9.0 | 26.1 | 41 |
10.0 | 26.8 | 42 |