Overview
The Powerslide Phuzion Radon 80 Skates - Umber have a beautiful look with natural and warm tones. A great feel in Eco-friendly materials that is great for recreational skating, but with high-quality trinity frames that can also handle more intense fitness workouts. Removable trinity mount frames also open up a wide selection of frames should you want to change wheel configurations later on.
The shell and outsole are made of eco-friendly glass-fiber reinforced plastic with 30% recycled material and 15% wheat. They have a fixed liner with EVA padding and an EVA sole that feels super cozy on long rides. They wrap around your feet comfortably with standard lacing, a velcro strap, and a cuff buckle. Trinity mounting is a 3-point system that makes the power transfer feel amazing and more reactive by lowering the skate height with a winged mount under the ball of the foot. It also adds stability and makes for better balance. The wheels are 80mm with an 85A hardness that feels awesome on trails or roads with Wicked ABEC5 bearings inside.
| Model Year | 2024 |
|---|---|
| Skate Type | Recreational |
| Skill Level | Beginner and Intermediate |
| Weight | 1320g (US 8.0 EU 41) |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. | |
| HABS Height Adjustable Brake System An easy and secure brake that allows for the brake pad to adjust up and down to prolong the life of the rubber. A rear axle that is threaded at both ends allows for the installation and removal of the brake with four outer screws that eliminate having to remove the axle or wheel. |
| BOOTS | |
|---|---|
| Construction | Soft Boot |
| Cuff | Standard |
| Liners | Fixed - Not Removable |
| Heat Moldable | No |
| Closures | Cuff Buckle 45 Degree Velcro Power Strap Standard Lacing |
| Mounting | Trinity X |
| FRAMES | |
|---|---|
| Material | Casted Aluminum |
| Mounting | Trinity |
| Length | Sizes 5.0 - 8.0 (EU36-41) 9.6” Axle to Axle Sizes 8.0 - 12.5 (EU42-47) 10.8" Axle to Axle |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 4x80mm |
| Max Wheel Size | 80mm |
| Axles | One-Piece 8mm |
| COMPONENTS | |
|---|---|
| Wheels | Powerslide Phuzion 80mm 85A |
| Bearings | Wicked ABEC7 |
| Brake | Yes |
| Axle for Brake Removal | Included |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 940704 |
| Time | 2 Years |
| Contact | Inline Warehouse |
| Country of Origin | China |
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| FIT GUIDELINES: Use foot measurement for the most precise fit. Add .5cm to the measurement for extra room at the toe or if wider feet. |
| Radon Size | CM | EU |
|---|---|---|
| 5.5 | 23.6 | 37 |
| 6.0 | 24.2 | 38 |
| 7.0 | 24.8 | 39 |
| 7.5 | 25.5 | 40 |
| 8.0 | 26.1 | 41 |
| 9.0 | 26.8 | 42 |
| 10.0 | 27.5 | 43 |
| 10.5 | 28.2 | 44 |
| 11.0 | 28.9 | 45 |
| 12.0 | 296 | 46 |
| 12.5 | 30.3 | 47 |
