Overview
The Powerslide Phuzion 80 Skates - Mercury is well-made for fitness enthusiasts to enjoy comfort and performance. They are easy enough for a beginner to skate, but with components to handle intense workouts.
The Powerslide Phuzion 80 Mercury Skates have a lightweight glass-fiber reinforced plastic shells with flexible cuffs. This provides both support and agility. The uppers are made from high-grade nubuck and PU leather to be comfortable and durable, but limit boot stretch to capture and transfer energy. Comfort is then enhanced with recall memory fit foam padding. Trinity Frame Mounting positions feet low to the ground for easy control and stability. Elite Frames are 3D-casted ADC10 aluminum to be strong and responsive. They hold Phuzion 80mm 83A and Wicked ABEC7 Bearings to have them road ready.
| Model Year | 2024 |
|---|---|
| Skate Type | Recreational, Cross-Training |
| Skill Level | Intermediate and Better |
| Weight | 1420g (US 8.0 EU 41) |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. | |
| HABS Height Adjustable Brake System An easy and secure brake that allows for the brake pad to adjust up and down to prolong the life of the rubber. A rear axle that is threaded at both ends allows for the installation and removal of the brake with four outer screws that eliminate having to remove the axle or wheel. |
| BOOTS | |
|---|---|
| Construction | Glass-Fiber Reinforced Plastic |
| Cuff | Medium |
| Liners | MyFit Recall Memory Fit - Fixed |
| Heat Moldable | No |
| Closures | Cuff Buckle 45 Degree Ratchet Buckle Standard Lacing |
| Mounting | Trinity |
| FRAMES | Elite Aluminum |
|---|---|
| Material | 3D Casted ADC10 Aluminum |
| Mounting | Trinity |
| Length | Sizes 7.5 - 8.0 (EU40-41) 9.6” or 243mm Axle to Axle Sizes 8.0 - 12.5 (EU42-47) 10.8" or 275mm Axle to Axle |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 4x80mm |
| Max Wheel Size | Sizes 7.5 - 8.0 (EU40-41) 80mm Sizes 7.5 - 8.0 (EU42-47) 90mm |
| Axles | One-Piece 8mm |
| COMPONENTS | |
|---|---|
| Wheels | Phuzion 80mm 83A |
| Bearings | Wicked ABEC7 |
| Brake | Included |
| Axle for Brake Removal | Included |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 940698 |
| Time | 2 Years |
| Contact | Inline Warehouse |
| Country of Origin | China |
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| FIT GUIDELINES: Use foot measurement for the most precise fit. Add .5cm to the measurement for extra room at the toe or if wider feet. |
| Mercury 80 Size | CM | EU |
|---|---|---|
| 5.5 | 23.6 | 37 |
| 6.0 | 24.2 | 38 |
| 7.0 | 24.8 | 39 |
| 7.5 | 25.5 | 40 |
| 8.0 | 26.1 | 41 |
| 9.0 | 26.8 | 42 |
| 10.0 | 27.5 | 43 |
| 10.5 | 28.2 | 44 |
| 11.0 | 28.9 | 45 |
| 12.0 | 29.6 | 46 |
| 12.5 | 30.3 | 47 |
