Overview
The JRZ Lightspeed 2 Steel Runners are quickly taking over the game and giving players a step up on their competition. They have manufactured their steel with such precise accuracy that you'll get a consistent 10 ft. neutral pitch radius and high-quality product every time you purchase JRZ steel.
They also have a raised height of 22mm with added height to the toe and heel of the blades. This in turn provides even more sharpening life over standard steel, especially for the player who consistently profiles their blades. Players will also be able to maximize the lean in their turns and obtain more control when stopping and accelerating.
IW can have your skate blades delivered profiled, sharpened and game-ready! With custom blade profile options including Zuperior, Quad and Ellipse, you can immediately improve your speed, stability and agility compared to stock flat profiles. We also offer a wide range of sharpening options and when it is time for a fresh profile or edge tune-up, use our Express Mail-In Skate Blade Profiling and Sharpening service. Select your blade profile and sharpening hollow when you add a blade to your cart. Learn even more here.
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| 22mm Blade Height One of the highest steel profiles on the market provides tighter turns, harder stops, and extends the sharpening lifespan over standard steel runners. |
| CONSTRUCTION | |
|---|---|
| Steel Grade | High-Grade |
| Blade Finish | Standard |
| Blade Height | 22mm (Size Sr 9 Runner) |
| Blade Profile | Single Blade Profile (10') |
| Product Note | All blades are independently measured at IW Hockey with a 5% variance. |
Sizing Chart
| HOW TO FIND YOUR SKATE BLADE SIZE | |
|---|---|
| Take your current hockey skates and identify the three-digit number, which can be found on the heel side of your blade holder or on the blades themselves. Locate your three-digit number in the sizing charts below to find your JRZ Non-Edge Runner size. If for any reason you cannot locate the number, see our How to Size a Hockey Skate Blade and Holder article for a more in-depth approach to skate blade sizing and skate blade compatibility. |
| Note: The JRZ Lightspeed 2 Steel Runners are designed to fit into the Bauer Tuuk Lightspeed II Holder only. They cannot fit into any Bauer skate that uses the Tuuk Lightspeed Edge Holder. |
| JRZ NON-EDGE RUNNER SIZING CHART | |||
|---|---|---|---|
| Holder Size | Skate Size (D-Width) | Skate Size (EE-Width) | Runner Size |
| Jr 5 | 5.0 - 5.5 | 4.5 - 5.0 | 246mm |
| Sr 6 | 6.0 - 6.5 | 5.5 - 6.0 | 254mm |
| Sr 7 | 7.0 - 7.5 | 6.5 - 7.0 | 263mm |
| Sr 8 | 8.0 - 8.5 | 7.5 - 8.0 | 272mm |
| Sr 9 | 9.0 - 9.5 | 8.5 - 9.0 | 280mm |
| Sr 10 | 10.0 - 10.5 | 9.5 - 10.0 | 288mm |
| Sr 11 | 11.0 - 11.5 | 10.5 - 11.0 | 296mm |
| COMPATIBLE BAUER SKATES (2012 - 2013) | ||
|---|---|---|
| Year | Family | Model |
| 2013 | Nexus | 1000, 800, 600, 400 |
| 2012 | Supreme | NXG, One.9, One.8, One.7, One.6 |
| 2012 | Vapor | APX, X7.0, X6.0, X5.0, X4.0 |
| HELPFUL ARTICLES | |
|---|---|
| How to Size a Hockey Skate Blade and Holder | |
| How to Select the Correct Skate Sharpening and Profile | |
| ProSharp Profiling and Sharpening Servies |
