Bladetech Lightspeed 2 Polished
Overview
The Bladetech Lightspeed 2 Polished Steel Runners feature Flex Force Technology, which makes Bladetech unlike any other replacement steel on the market. Flex Force Technology provides hockey players with both performance and health benefits. The runner has a unique design where the blade flexes up into the holder, absorbing and storing the vertical energy before exploding it back out during the stride extension.
This new technology increases player speed and acceleration, as well as absorbs vertical energy that would normally be absorbed by the knee joint. This ultimately reduces stress on the knees while increasing the efficiency of each stride, slowing down player fatigue. Bladetech only uses the highest quality of steel and finished the surface with a high polish, giving players a longer glide and sharpening life.
IW can have your skate blades delivered profiled, sharpened and game-ready! With custom blade profile options including Zuperior, Quad and Ellipse, you can immediately improve your speed, stability and agility compared to stock flat profiles. We also offer a wide range of sharpening options and when it is time for a fresh profile or edge tune-up, use our Express Mail-In Skate Blade Profiling and Sharpening service. Select your blade profile and sharpening hollow when you add a blade to your cart. Learn even more here.
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Official Blade of the American Collegiate Hockey Association (ACHA) Bladetech Hockey has been named as the Preferred Skate Blade Partner of the ACHA. Through this partnership, Bladetech Hockey’s patented Flex Force Advantage skate blade will now be available to power ACHA players with customized stainless-steel runners. |
|
| Flex-Force A patented blade design that allows the front portion of the runner to flex up into the holder of your skates. This stores the vertical energy and releases it when you extend your stride, increasing your speed and maximizing acceleration. |
|
| High Polish Premium finish that provides better glide and longer sharpening life. |
|
| 22mm Blade Height Taller than standard OEM runners, this added height provides tighter turns, harder stops, and extends the sharpening lifespan over standard steel runners. |
| CONSTRUCTION | |
|---|---|
| Steel Grade | High-Grade |
| Blade Finish | High Polish |
| Blade Height | 22mm (Size 280mm Runner) |
| Blade Profile | Single Blade Profile (9') |
| Product Note | All blades are independently measured at IW Hockey with a 5% variance. |
Videos
Sizing Chart
| HOW TO FIND YOUR SKATE BLADE SIZE | |
|---|---|
| Take your current hockey skates and identify the three-digit number, which can be found on the heel side of your blade holder or on the blades themselves. Locate your three-digit number in the sizing charts below to find your Bladetech Non-Edge Runner size. If for any reason you cannot locate the number, see our How to Size a Hockey Skate Blade and Holder article for a more in-depth approach to skate blade sizing and skate blade compatibility. |
| Note: The Bladetech Lightspeed 2 Steel Runners are designed to fit into the Bauer Tuuk Lightspeed II Holder only. They cannot fit into any Bauer skate that uses the Tuuk Lightspeed Edge Holder. |
| JUNIOR - BLADETECH NON-EDGE RUNNER SIZING CHART | ||||
|---|---|---|---|---|
| Holder Size | Skate Size (D-Width) | Skate Size (EE-Width) | Runner Size | Profile & Radius |
| Jr 4 | 4.0 - 4.5 | 3.5 - 4.0 | 238mm | Single (9') |
| Jr 5 | 5.0 - 5.5 | 4.5 - 5.0 | 246mm | Single (9') |
| SENIOR - BLADETECH NON-EDGE RUNNER SIZING CHART | ||||
|---|---|---|---|---|
| Holder Size | Skate Size (D-Width) | Skate Size (EE-Width) | Runner Size | Profile & Radius |
| Sr 6 | 6.0 - 6.5 | 5.5 - 6.0 | 254mm | Single (9') |
| Sr 7 | 7.0 - 7.5 | 6.5 - 7.0 | 263mm | Single (9') |
| Sr 8 | 8.0 - 8.5 | 7.5 - 8.0 | 272mm | Single (9') |
| Sr 9 | 9.0 - 9.5 | 8.5 - 9.0 | 280mm | Single (9') |
| Sr 10 | 10.0 - 10.5 | 9.5 - 10.0 | 288mm | Single (9') |
| Sr 11 | 11.0 - 11.5 | 10.5 - 11.0 | 296mm | Single (9') |
| COMPATIBLE BAUER SKATES (2012 - 2013) | ||
|---|---|---|
| Year | Family | Model |
| 2013 | Nexus | 1000, 800, 600, 400 |
| 2012 | Supreme | NXG, One.9, One.8, One.7, One.6 |
| 2012 | Vapor | APX, X7.0, X6.0, X5.0, X4.0 |
| HELPFUL ARTICLES | |
|---|---|
| How to Size a Hockey Skate Blade and Holder | |
| How to Select the Correct Skate Sharpening and Profile | |
| ProSharp Profiling and Sharpening Servies |
