CCM Hockey Skates
CCM Ice Hockey Skates
CCM Ice Hockey Skate Accessories
- Runner Compatibility: SpeedBlade XS
- Skate Size Range: 1-13
The CCM SpeedBlade XS Holder is the standard replacement holder for all CCM skates since using the XS quick-release system. Since 2019, most CCM skates have used the Regular Dial found on this holder. However, in 2023, CCM introduced a Larger Dial with different mounting hardware on select top-end models.
- Holder Compatibility: CCM SpeedBlade XS
- Steel Grade: High-Grade
- Blade Finish: Standard
- Blade Height: 17mm (Size 280mm)
- Blade Profile: Single (10')
- Skate Size Range: 1-12
The CCM SpeedBlade XS Runners are the replacement runners for the new SpeedBlade XS1 holder. These are the entry-level model in the XS runner line and is a must-have in the bag in the event a player's current steel becomes damaged or broken during play. These runners are sold in pairs and are unsharpened.
- Holder Compatibility: CCM SpeedBlade XS
- Steel Grade: Premium-Grade
- Blade Finish: Carbon Chrome
- Blade Height: 21mm (Size 280mm)
- Blade Profile: Single (10')
- Skate Size Range: 1-13
The Step Blacksteel Speedblade XS Runners are some of the hardest steel runners on the market. Carbon nanoparticles coat the outer layer providing an extremely hard edge. This produces incredible bite and control on every turn and stop, as well as prevents burrs after sharpening.
- Holder Compatibility: CCM SpeedBlade XS
- Steel Grade: Premium-Grade
- Blade Finish: Mirror
- Blade Height: 21mm (Size 280mm)
- Blade Profile: Single (10')
- Skate Size Range: 1-13
The Step Steel SpeedBlade XS V-Steel Runners have been polished to a mirror finish that will take your game to the next level. This finish improves glide so you waste less energy and will provide more precise turns. Plus, with a 21mm steel height, the V-Steel Runners allow you to lean deeper in your turns without bottoming out and provides a longer sharpening life.
- Holder Compatibility: CCM SpeedBlade XS
- Steel Grade: High-Grade
- Blade Finish: Standard
- Blade Height: 21mm (Size 280mm)
- Blade Profile: Single (10')
- Skate Size Range: 1-13
The Step Steel SpeedBlade XS Runners have a high-precision raised profile to give hockey players a better turning radius, a superior glide, and a longer-lasting sharpening life. Step Steel has made it their duty to provide players with a high-grade steel runner for maximum performance. With Step's runner, players can get a deeper lean on their edge without bottoming out and much more control on harder, quicker stops.
- Holder Compatibility: CCM SpeedBlade +4.0
- Steel Grade: Premium-Grade
- Blade Finish: Carbon Chrome
- Blade Height: 23mm (Size 280mm)
- Blade Profile: Single (10')
- Skate Size Range: 1-13
The Step Blacksteel Speedblade +4.0 Runners are some of the hardest steel runners on the market. Carbon nanoparticles coat the outer layer providing an extremely hard edge. This produces incredible bite and control on every turn and stop, as well as prevents burrs after sharpening.
- Holder Compatibility: CCM SpeedBlade +4.0
- Steel Grade: High-Grade
- Blade Finish: High Polish
- Blade Height: 23mm (Size 280mm)
- Blade Profile: Single (10')
- Skate Size Range: 1-13
The Step Steel SpeedBlade +4.0 Runners have a high-precision raised profile to give hockey players a better turning radius, a superior glide, and a longer-lasting sharpening life. Step Steel has made it their duty to provide players with a high-grade steel runner for maximum performance. With Step's runner, players can get a deeper lean on their edge without bottoming out and much more control on harder, quicker stops.
- Holder Compatibility: CCM SpeedBlade XSG
- Steel Grade: High-Grade
- Blade Finish: Polished
- Skate Size Range: Y13-12
The CCM SpeedBlade XSG1 Stainless Goalie Steel Runner is a high-performance blade with an additional 2mm of height to give goalies an even better attack angle for even more explosive pushes through the crease. The extra height also extends the blades sharpening life and provides a more aggressive turning radius too. The XSG1 Stainless Steel Runners are sold in pairs and come unsharpened.
- Holder Compatibility: CCM SpeedBlade XSG
- Steel Grade: Premium-Grade
- Blade Finish: Carbon Chrome
- Blade Height: 20mm (Size 282mm)
- Skate Size Range: 5-12
The Step Blacksteel SpeedBlade 4mm XSG Goal Runners feature a larger contact surface with the ice to give goalies more stability in their stance and bigger bite in the ice. While the bottom portion of the blade is 4mm, the top portion remains 3mm in order to fit into the SpeedBlade XSG Holder from CCM.
- Holder Compatibility: CCM SpeedBlade XSG
- Steel Grade: Premium-Grade
- Blade Finish: Carbon Chrome
- Blade Height: 20mm (Size 282mm)
- Skate Size Range: 5-12
The Step Blacksteel SpeedBlade XSG Goal Runners boast an incredibly hard, fine edge due to the layer of carbon nanoparticles which creates the 'black' coating. The blade's hard edge can stand up much better against bangs and impacts that ultimately improves and extends the runner's lifespan.
- Holder Compatibility: CCM SpeedBlade XSG
- Steel Grade: High-Grade
- Blade Finish: Standard
- Blade Height: 20mm (Size 282mm)
- Skate Size Range: 5-12
The Step CCM XSG 3mm Forward Lean Goal Steel Runners feature a game-changing 10F27 profile, making these a great addition to a goalie's skate setup. The profile gently positions goalies in a forward-leaning stance, providing improved stability and agility within the crease which allows goalies to move and react quicker to each and every save.
- Holder Compatibility: CCM SpeedBlade XSG
- Steel Grade: High-Grade
- Blade Finish: Standard
- Blade Height: 20mm (Size 282mm)
- Skate Size Range: 5-12
The Step Steel SpeedBlade XSG Goal Runners are unlike other standard steel runners because they are built with added height to give goalies a much quicker butterfly recovery. Plus, it gives goalies better performance inside and outside the blue paint, whether it be cross-crease pushes or skating out to handle the puck.
The CCM Skate Towel is a must-have accessory for every player or goalie that's serious about maintaining their gear. Helping to keep your skate blades clean and rust-free, the absorbent cotton material quickly removes snow and moisture after every game or practice. Its generous size gives you plenty of surface area to ensure players can thoroughly dry both skate blades. Along with a CCM logo for a premium hockey look, the towel features a number tab for personal customization.
The CCM SpeedBlade XS Carrying Case stores and protects hockey steel of size 304mm and smaller. It has a center plastic divider to either separate two pairs of steel or divides a single pair from one another.
The CCM SpeedBlade XS Replacement Adjustment Screw is the replacement hardware for CCM's SpeedBlade XS and XSG Holders. In case the SpeedBlade Xchange System becomes damaged or broken, this replacement hardware prevents players from needing to replace the entire holder.
The Reebok and CCM Holder Replacement Screw Set are the replacement screw and post for SpeedBlade and E-Pro holders. The simple and effective design of these holders allows you to swap out steel and hardware in seconds.
- Holder Compatibility: CCM SpeedBlade XS
- Steel Grade: Premium-Grade
- Blade Finish: Carbon Chrome
- Blade Height: 21mm (Size 280mm)
- Blade Profile: Single (10')
- Skate Size Range: 1-13
The Step Blacksteel Speedblade XS Runners are some of the hardest steel runners on the market. Carbon nanoparticles coat the outer layer providing an extremely hard edge. This produces incredible bite and control on every turn and stop, as well as prevents burrs after sharpening.
- Holder Compatibility: CCM SpeedBlade XS
- Steel Grade: Premium-Grade
- Blade Finish: Mirror
- Blade Height: 21mm (Size 280mm)
- Blade Profile: Single (10')
- Skate Size Range: 1-13
The Step Steel SpeedBlade XS V-Steel Runners have been polished to a mirror finish that will take your game to the next level. This finish improves glide so you waste less energy and will provide more precise turns. Plus, with a 21mm steel height, the V-Steel Runners allow you to lean deeper in your turns without bottoming out and provides a longer sharpening life.
- Holder Compatibility: CCM SpeedBlade XS
- Steel Grade: High-Grade
- Blade Finish: Standard
- Blade Height: 21mm (Size 280mm)
- Blade Profile: Single (10')
- Skate Size Range: 1-13
The Step Steel SpeedBlade XS Runners have a high-precision raised profile to give hockey players a better turning radius, a superior glide, and a longer-lasting sharpening life. Step Steel has made it their duty to provide players with a high-grade steel runner for maximum performance. With Step's runner, players can get a deeper lean on their edge without bottoming out and much more control on harder, quicker stops.
- Holder Compatibility: CCM SpeedBlade +4.0
- Steel Grade: Premium-Grade
- Blade Finish: Carbon Chrome
- Blade Height: 23mm (Size 280mm)
- Blade Profile: Single (10')
- Skate Size Range: 1-13
The Step Blacksteel Speedblade +4.0 Runners are some of the hardest steel runners on the market. Carbon nanoparticles coat the outer layer providing an extremely hard edge. This produces incredible bite and control on every turn and stop, as well as prevents burrs after sharpening.
- Holder Compatibility: CCM SpeedBlade +4.0
- Steel Grade: High-Grade
- Blade Finish: High Polish
- Blade Height: 23mm (Size 280mm)
- Blade Profile: Single (10')
- Skate Size Range: 1-13
The Step Steel SpeedBlade +4.0 Runners have a high-precision raised profile to give hockey players a better turning radius, a superior glide, and a longer-lasting sharpening life. Step Steel has made it their duty to provide players with a high-grade steel runner for maximum performance. With Step's runner, players can get a deeper lean on their edge without bottoming out and much more control on harder, quicker stops.
- Holder Compatibility: CCM SpeedBlade XSG
- Steel Grade: Premium-Grade
- Blade Finish: Carbon Chrome
- Blade Height: 20mm (Size 282mm)
- Skate Size Range: 5-12
The Step Blacksteel SpeedBlade 4mm XSG Goal Runners feature a larger contact surface with the ice to give goalies more stability in their stance and bigger bite in the ice. While the bottom portion of the blade is 4mm, the top portion remains 3mm in order to fit into the SpeedBlade XSG Holder from CCM.
- Holder Compatibility: CCM SpeedBlade XSG
- Steel Grade: Premium-Grade
- Blade Finish: Carbon Chrome
- Blade Height: 20mm (Size 282mm)
- Skate Size Range: 5-12
The Step Blacksteel SpeedBlade XSG Goal Runners boast an incredibly hard, fine edge due to the layer of carbon nanoparticles which creates the 'black' coating. The blade's hard edge can stand up much better against bangs and impacts that ultimately improves and extends the runner's lifespan.
- Holder Compatibility: CCM SpeedBlade XSG
- Steel Grade: High-Grade
- Blade Finish: Standard
- Blade Height: 20mm (Size 282mm)
- Skate Size Range: 5-12
The Step CCM XSG 3mm Forward Lean Goal Steel Runners feature a game-changing 10F27 profile, making these a great addition to a goalie's skate setup. The profile gently positions goalies in a forward-leaning stance, providing improved stability and agility within the crease which allows goalies to move and react quicker to each and every save.
- Holder Compatibility: CCM SpeedBlade XSG
- Steel Grade: High-Grade
- Blade Finish: Standard
- Blade Height: 20mm (Size 282mm)
- Skate Size Range: 5-12
The Step Steel SpeedBlade XSG Goal Runners are unlike other standard steel runners because they are built with added height to give goalies a much quicker butterfly recovery. Plus, it gives goalies better performance inside and outside the blue paint, whether it be cross-crease pushes or skating out to handle the puck.
Skate Sharpening
and Profiling Services
Have your skates or blades delivered game-ready.