Overview
The Brunny Pro 3056 Slide Blocks are pro-level grind blocks that have been carefully engineered to enhance slides, stalls, and grinds. They are made using a high quality, durable polymer material that is both slick and incredibly durable. These blocks can handle the toughest tricks and biggest slams for a really long time before any significant wear sets in.
This Pro edition of Brunny's slide blocks has slightly more curvature than their standard blocks, and that design is intended to help lock in on coping and rails. They even added a Royal Groove, which is a beautiful little cutout on the wide edges of the blocks that helps lock in royale grinds. Elsewhere, all of the edges are rounded and smooth to help prevent wheel bite and ease transitions.
Although these blocks were designed with pro skaters in mind, they're extremely accessible for even the newest of park skaters. In fact, we highly recommend these blocks for beginners because of how much easier they make a lot of tricks. Brunny Pro Blocks are quite simply one of the best slide blocks available for any park or aggressive skating setup.
| Slide Blocks Compatibility | |
|---|---|
| For detailed sizing and compatibility information, check out Brunny PO Block Compatibility. | |
| Brunny Blocks are designed to fit most roller skate plates that have 5-10 degree kingpins. They are compatible with many 15-20 degree kingpins as well, but installation will likely require some bending of the mounting bars to get them to rest flush against the plates. | |
| Brunny Blocks are not compatible with Pilot Falcon Plates, and are only compatible with PowerDyne Reactor Plates with some modification. Reactors have flared kingpins that interfere with the mounting bar. Skilled machinists can countersink the mounting bars to match the kingpin's flare, or the flare can be covered with a simple washer that gives the mounting bar a flat surface to rest on. |
Specifications
| Brunny Pro Blocks | |
| Included | (2) Slide Blocks (2) Mounting Bars (4) Mounting Bolts (4) Mounting Nuts (1) Hex Wrench |
Videos
Sizing Chart
| SIZING INSTRUCTIONS | |
|---|---|
| Remove all cushions and trucks from the kingpin assembly on one your skates. Measure the shortest distance between the kingpins (where they come out of the baseplate) and choose the appropriate size. | |
| For full compatibility and sizing please visit our guide: Brunny P.O. Block Compatibility Charts |
| BRUNNY BLOCK SIZING | ||||
|---|---|---|---|---|
| SMALL | MEDIUM | LARGE | X-LARGE | |
| Kingpin Distance | 60mm - 79mm | 80mm - 94mm | 95mm - 109mm | 110mm - 145mm |
