The Standard Brian Weiss Omni V3 Pro
Pre-order - Landing February 2026
The Standard Brian Weis Omni V3 Pro Skates. This is Brian's first pro skate. It's vibrant blue with a light grey carrying strap and stripe separating the shell and soul. Black Comfort Liners, black laces, blue Standard wheels, and the new black Standard Frames all look great together and are just crying to be put on your feet.
In the Standard Omni V3, updates include countersinking bolts for a cleaner install, updated hardware to prevent any liner damage, and new tooling to ensure a flat frame stays flat. Based on feedback, the biggest modification is that they have thinned out the flaps around the ankle area to create a smoother transition from the boot to the cuff. This will help to alleviate any pressure points and help you to skater for longer. Also, they have included their new PU Heel Shock Absorbing Heel Pad for improved shock absorbing bounce and responsiveness. V3 Comfort Liners have more internal volume and better fill the Omni shell, and still provide plush, heat moldable cuffs, padded toes, adjustable locking elastic laces and non-slip foot treads. Lastly, the Standard Anti-Rocker Frame which comes in three different sizes, delivers a great ride and slide right out of the box.
Round profile Standard 60mm 90A wheels with an anti-rocker setup (ABEC9 bearings).Skate tool and photo book are included.
Specifications
| BOOTS | Omni V3 |
|---|---|
| Construction | Glass-Fiber Reinforced Plastic |
| Cuff | Low V-Cut |
| Liners | Comfort V3 |
| Heat Moldable | Yes (Liners) |
| Closures | Locking Cuff Buckle Flexible (Elastic) Lacing |
| Mounting | UFS |
| FRAMES | Standard |
|---|---|
| Material | Plastic |
| Mounting | UFS |
| Length | Sizes 6.0-7.0 (39-40) 245mm Sizes 8.0-10.5 (41-44) 260mm Sizes 11.0-12.0 (45-46) 275mm |
| Removable | Yes |
| Adjustable | No |
| Stock Wheel Setup | 4x60 4xAnti-Rocker Wheels |
| Max Wheel Size | 65mm (50mm middle) |
| Axles | Two-Piece 8mm Axles |
| COMPONENTS | |
|---|---|
| Wheels | Standard 60mm 90A |
| Bearings | ABEC9 |
| Brake | N/A |
| Axle for Brake Removal | N/A |
| Skate Tool | Included 4mm Hex |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | OMNIV3-BRIANWEISPRO |
| Time | 6 Months |
| Contact | Inline Warehouse |
| Country of Origin | China |
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific sizE chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. |
Measurements taken from digital drawings (+/- 2mm tolerance).
| Omni V2 Skate Size | CM | EU |
|---|---|---|
| 4.0 - 5.0 (XS) | 24.9 | 37 - 38 |
| 6.0 - 7.0 (SM) | 26.1 | 39 - 40 |
| 8.0 - 9.0 (MD) | 27.2 | 41 - 42 |
| 10.0 - 10.5 (LG) | 28.5 | 43 - 44 |
| 11.0 - 12.0 (XL) | 30.0 | 45 - 46 |
