Overview
The Rollerblade Macroblade 84 Women's Skates are comfy and made with great details that make it an overall great skate. They require no break-in with their soft boots that have engineered mesh that gives a sock-like feel. Sizing is easy with each pair covering a full-size range (i.e. 8.0-8.5) with footboard sizers that can reduce or add volume within. The padding wraps around your foot with articulation in the heel and tongue that make them easier to skate in for longer periods of time. The closures support the fit with standard lacing, 45-degree velcro straps, and the cuff buckle. The higher cuff provides lateral support and stability, with a good amount of flex.
The aluminum frames (not removable or adjustable) are lower to the ground with their monocoque design. They help the skater balance and are very durable. 84mm 84A wheels are excellent for outdoor skating. Inside those wheels, SG7 bearings perform well and keep your speed at a manageable pace.
If you are looking for a specific part, check out the Macroblade 84 Components List.
| Model Year | 2023-2024 |
|---|---|
| Skate Type | Recreational, Cross-Training |
| Skill Level | Beginner and Intermediate |
| Weight | TBD |
Specifications
| BOOTS | |
|---|---|
| Construction | Molded Plastic |
| Cuff | High |
| Liners | Fixed - Not Removable |
| Heat Moldable | No |
| Closures | Cuff Buckle 45 Degree Velcro Strap Standard Lacing |
| Mounting | Monocoque |
| FRAMES | |
|---|---|
| Material | Aluminum |
| Mounting | Monocoque |
| Length | 10.4” Axle to Axle (265mm) |
| Removable | No |
| Adjustable | No |
| Stock Wheel Setup | 4x84mm |
| Max Wheel Size | 84mm |
| Axles | Rollerblade Two-Piece Omega 8mm Axles |
| COMPONENTS | |
|---|---|
| Wheels | Rollerblade 84mm 84A |
| Bearings | Rollerblade SG7 |
| Brake | Yes |
| Axle for Brake Removal | Included |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 0737090039D |
| Time | 6 Months |
| Contact | Inline Warehouse |
| Country of Origin | Vietnam |
Videos
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| GENERAL MACROBLADE SIZING GUIDELINES: Ordering US shoe sizes works for most. Add .5cm to the measurement for extra room at the toe or if wider feet. |
| Macroblade Size | CM | EU |
|---|---|---|
| 5.0 - 5.5 | 22.0 - 22.5 | 35 - 36 |
| 6.0 - 6.5 | 23.0 - 23.5 | 36.5 - 37 |
| 7.0 - 7.5 | 24.0 - 24.5 | 38 - 38.5 |
| 8.0 - 8.5 | 25.0 - 25.5 | 39 - 40 |
| 9.0 - 9.5 | 26.0 - 26.5 | 40.5 - 41 |
| 10.0 - 10.5 | 27.0 -27.5 | 42 - 42.5 |
