Overview
The Rollerblade Macroblade 80 Skates for Men have a fresh new look. Macroblade boots are known for comfort and quality. This easy to skate 80mm option (max 84mm) has performance-enhancing aluminum frames. They are easy for beginning and recreational skaters, with the capability for fitness skating.
Macroblade boots are made with comfortable and breathable engineered mesh under a plastic exo-skeleton that provides support and integrity. Performance Liners (not removable) are breathable and comfortable right out of the box. Twinblade Aluminum Frames offer good energy transfer with the ability to add speed and performance of larger and 84mm wheels when ready. The Macroblade 80 Skates come with a brake attached, Rollerblade 80mm 82A Wheels and Rollerblade SG5 Bearings. The stock wheels are ready for outdoor skating at 82A hardness but can be skated indoors with grip/slide depending on the skater weight and skating surface.
If you are looking for a specific part, check out the Macroblade 80 Components List.
| Model Year | 2025 |
|---|---|
| Skate Type | Recreational, Cross-Training |
| Skill Level | Beginner and Intermediate |
| Weight | 1289g (US 8.0 EU 40.5) |
Specifications
KEY TECHNOLOGIES | |
|---|---|
| Footboard Sizer A slim insole that removes/adds volume when placed under the footbed. Included in the skate box, they help each boot cover a full size range (i.e. 9.0-9.5), making them easy to size with the ability to provide a more snug or more relaxed fit. |
| BOOTS | |
|---|---|
| Construction | Engineered Mesh Plastic Outsole and Cuff |
| Cuff | High |
| Liners | Fixed - Not Removable |
| Heat Moldable | No |
| Closures | Cuff Buckle 45 Degree Velcro Strap Standard Lacing |
| Mounting | Monocoque |
| FRAMES | |
|---|---|
| Material | Aluminum |
| Mounting | Monocoque |
| Length | 10.4” Axle to Axle (264mm) or 11” Axle to Axle (279mm) |
| Removable | No |
| Adjustable | No |
| Stock Wheel Setup | 4x80mm |
| Max Wheel Size | 84mm |
| Axles | Two-Piece 8mm Axles, 4mm Hex Wheel Axles 2.0 Alu Frames 09201900000 Item# 09201000000 |
| COMPONENTS | |
|---|---|
| Wheels | Rollerblade 80mm 82A |
| Bearings | Rollerblade SG5 |
| Brake | Yes |
| Axle for Brake Removal | Included |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 86B0751450 NG01 |
| Time | 6 Months |
| Contact | Inline Warehouse |
| Country of Origin | Vietnam |
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| GENERAL MACROBLADE SIZING GUIDELINES: Ordering US shoe sizes works for most. Add .5cm to the measurement for extra room at the toe or if wider feet. |
| Macroblade Size | CM | EU |
|---|---|---|
| 6.0 - 6.5 | 24.0 - 24.5 | 38 - 38.5 |
| 7.0 - 7.5 | 25.0 - 25.5 | 39 - 40 |
| 8.0 - 8.5 | 26.0 - 26.5 | 40.5 - 41 |
| 9.0 - 9.5 | 27.0 - 27.5 | 42 - 42.5 |
| 10.0 - 10.5 | 28.0 - 28.5 | 43 - 44 |
| 11.0 - 11.5 | 29.0 - 29.5 | 44.5 - 45 |
| 12.0 - 12.5 | 30.0 - 30.5 | 45.5 - 46 |
| 13.0 - 13.5 | 31.0 - 31.5 | 47 - 47.5 |
