Overview
The Roces M12 Lo Team Cappuccino Skates are made with mostly eco-friendly materials. The beige and egg shell colors do remind of a nice cappuccino. The dual-colored soleplates tie it altogether so that they are served hot!
The M12 Lo design is well-loved and a favorite of both pros and amateurs. The M12 Lo Skates are made consciously with bio-based high-grade polyurethane with 47% cornstarch and recycled padding and lining on the liners. Roces takes it further by staying away from using plastic in any of the packaging. The Majestic 12 mold is a classic mold and with the (Lo) lower cuffs they allow for more ankle movement. Aluminum memory buckles are simply the best for getting your skates on and off quickly without re-adjusting. The glass-fiber reinforced polyamide UFS frames are slippery for grinds with central grinding anti-rocker wheels and 58mm 88A wheels on the ends.
Runs small and narrow - It is suggested to order one full size larger than your shoe size.
| OVERVIEW | |
|---|---|
| Model Year | 2024 |
| Skate Type | Aggressive |
| Skill Level | All Levels |
| Weight | 1745g (US 8.0 EU 41) |
Specifications
| BOOTS | M12 Lo |
|---|---|
| Construction | Hard Boot Recycled Polyurethane, 47% Cornstarch-Based |
| Cuff | Low |
| Liners | Removable - Memory Foam |
| Heat Moldable | No |
| Closures | Aluminum Memory Buckle Standard Lacing |
| Mounting | UFS |
| FRAMES | |
|---|---|
| Material | Glass Fiber Reinforced Polyamide |
| Mounting | UFS |
| Length | 9.8” Axle to Axle (249mm) |
| Removable | Yes |
| Adjustable | No |
| Stock Wheel Setup | 2x58mm 2xAnti-Rocker Wheels |
| Max Wheel Size | 62mm Flat |
| Axles | Two-Piece 8mm Axles (See Roces Inline Skate Axle for Replacements) |
| COMPONENTS | |
|---|---|
| Wheels | Roces Team 58mm 88A Central Grinding Wheels |
| Bearings | ABEC5 |
| Brake | N/A |
| Axle for Brake Removal | N/A |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 101286 006 |
| Time | 1 Year |
| Contact | Inline Warehouse |
| Country of Origin | Italy |
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| M12's are NOT true to size. They run small and fit narrow. Add 1.0cm to your foot measurement to determine size - More if having wide feet. If between sizes after adding to your measurement, round up to the next largest size. |
| M12 Lo Size | CM | EU |
|---|---|---|
| 4.0 - 5.0 | 21.5 - 22.5 | 36 - 38 |
| 6.0 | 25.0 | 39 |
| 7.0 | 25.5 | 40 |
| 8.0 | 26.0 | 41 |
| 9.0 | 27.0 | 42 |
| 10.0 | 28.0 | 43 |
| 10.5 | 28.5 | 44 |
| 11.0 | 29.0 | 45 |
| 12.0 | 29.5 | 46 |
| 13.0 | 30.5 | 47 |
| 14.0 | 31.0 | 48 |
| 15.0 | 31.5 | 49 |
