Powerslide Swell 100 3D Adapt
Overview
The Powerslide Swell 3D Adapt 100 Skates shown here in black with red accents, perform during strenuous straight-line cross-training activity but can also navigate curves and tighter locations with good agility.
The revolutionary 3D ADAPT (3DAP) padding technology from MYFIT allows for changes in design to include integrated air vents and channels for breathability with additional cushioning at the ankle, tongue, and innersole. Made from casted polyurethane, 3DAP molds perfectly around the feet for a level of control and comfort not felt previously this seamless padding doesn't break down or lose function like traditional padding.
Other updates include semi-clear and abrasion-resistant uppers and cuff spacers that allow for the cuffs to adjust up or down to the skater's support preference. These amazing design features are built around the popular TRINITY 3-point frame mounting system which uses a winged mount under the ball of the foot that creates a channel for the wheels to lower the center of gravity, add stability, and increase power transfer.
Elite Aluminum Frames, Swell 100mm 85A Wheels, and Wicked ABEC7 bearings. The frame length changes with skate size for the best skating experience. HABS height adjustable brake included.
Sizing Tip:
Unisex model based on US Men's sizing
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| 3D Adapt Padding Replaced traditional stitching methods with multiple layers of foam padding, with casted polyurethane. Sections are instead constructed with different density PU's. A harder anatomically designed bottom shape for support, and a softer PU ankle and tongue padding for comfort. Doesn't break down like regular padding for better value and allowed for features such as integrated ventilation channels and built-in lacing. | |
| Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. | |
| HABS Height Adjustable Brake System An easy and secure brake that allows for the brake pad to adjust up and down to prolong the life of the rubber. A rear axle that is threaded at both ends allows for the installation and removal of the brake with four outer screws that eliminate having to remove the axle or wheel. | |
| 3D Casted Frames Perfectly shaped around the wheels to optimize the space. 3D construction enhances stiffness and power transfer to offer characteristics similar to those found in CNC machined frames. |
| Model Year | 2021-2022 |
|---|---|
| Skate Type | Cross-Training |
| Skill Level | Intermediate and Better |
| Weight | 1520g (US 8.0 EU 41) |
| BOOTS | |
|---|---|
| Construction | Glass-Fiber Reinforced Plastic |
| Cuff | Height Adjustable Spacers |
| Liners | Fixed Liner with 3D Adapt Padding |
| Heat Moldable | Yes |
| Closures | Cuff Buckle 45° Velcro Strap Standard Lacing |
| Mounting | Trinity X (Front to Back and Lateral Adjustment) |
| FRAMES | Powerslide Elite |
|---|---|
| Material | Aluminum - 3D Casted |
| Mounting | Trinity |
| Length | 9.1Axle to Axle (243mm) 9.8Axle to Axle (270mm) |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 3x100mm |
| Max Wheel Size | 100mm |
| Axles | One-Piece 8mm, T25 Torx (520020) |
| COMPONENTS | |
|---|---|
| Wheels | Powerslide Swell 100mm 83A |
| Bearings | Wicked ABEC7 |
| Brake | Included HABS S/M (907031) |
| Axle for Brake Removal | Included and Installed (940427) Right Rear Axle is Threaded at Both Ends |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 510052 |
| Time | 2 Years |
| Contact | Inline Warehouse |
| Country of Origin | China |
Videos
Sizing Chart
| GENERAL INLINE SKATE SIZING GUIDELINES | |
|---|---|
| Measure feet with socks on and then reference the model-specific sizing chart. How to Measure Your Feet for Skates How to Try on Skates for Fit How to Choose an Inline Skate |
| POWERSLIDE SWELL INLINE SKATE SIZING CHART | ||||
|---|---|---|---|---|
SWELL | CM | US Men's | US Women's | EU |
| 6.0 | 24.2 | 6.0 | 7.0 | 38 |
| 7.0 | 24.8 | 7.0 | 8.0 | 39 |
| 7.5 | 25.5 | 7.5 | 8.5 | 40 |
| 8.0 | 26.1 | 8.0 | 9.0 | 41 |
| 9.0 | 26.8 | 9.0 | 10.0 | 42 |
| 10.0 | 27.5 | 10.0 | 11.0 | 43 |
| 10.5 | 28.2 | 10.5 | 11.5 | 44 |
| 11.0 | 28.9 | 11.0 | 45 | |
| 12.0 | 29.6 | 12.0 | 46 | |
| 12.5 | 30.3 | 12.5 | 47 | |
