Powerslide Phuzion Radon 84
Overview
The Powerslide Phuzion Radon 84 Skates in Charcoal are high-quality, comfy, and great for both new and returning skaters looking for skates that will last. They come with 84mm wheels, but the frames have versatility to skate 4x90mm wheels when looking for more speed over agility.
The Phuzion Radon Boots are super comfortable with nylon mesh uppers with EVA foam on the inside. They have glass-fiber reinforced cuff which offers great stability along with a velcro strap and standard lacing. Below are Trinity Elite Frames made from 3-D Cast ADC10 Aluminum. They are the same ones used on higher-end models being both strong and responsive. Trinity mount frames (removable and adjustable) use a winged mount in the front that creates a channel for the wheels. This brings your feet closer to the ground for better stability and power during push-off. The Radon 84 is packaged with Phuzion 84mm 83A Wheels but are ready to skate 4x90mm wheels if/when looking for more speed and performance (Wicked ABEC7 Bearings). They are road ready and able t be enjoyed by most every skill level. Comes with a HABS (height-adjustable brake system) brake attached.
Sizing Tip:
Unisex model based on US Men's sizing
| Model Year | 2024 |
|---|---|
| Skate Type | Recreational |
| Skill Level | Beginner and Intermediate |
| Weight | 1370g (US 8.0 EU 41) |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. | |
| HABS Height Adjustable Brake System An easy and secure brake that allows for the brake pad to adjust up and down to prolong the life of the rubber. A rear axle that is threaded at both ends allows for the installation and removal of the brake with four outer screws that eliminate having to remove the axle or wheel. |
| BOOTS | |
|---|---|
| Construction | Soft Boot |
| Cuff | Standard |
| Liners | Fixed - Not Removable |
| Heat Moldable | No |
| Closures | Cuff Buckle 45 Degree Velcro Power Strap Standard Lacing |
| Mounting | Trinity X |
| FRAMES | |
|---|---|
| Material | 3D Casted ADC10 Aluminum |
| Mounting | Trinity |
| Length | 10.8" 275mm |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 4x84mm |
| Max Wheel Size | 90mm |
| Axles | One-Piece 8mm (520020) One-Piece 8mm Brake Axle (940427) |
| COMPONENTS | |
|---|---|
| Wheels | Powerslide Phuzion 84mm 83A |
| Bearings | Wicked ABEC7 |
| Brake | Yes |
| Axle for Brake Removal | Included |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 940699 |
| Time | 2 Years |
| Contact | Inline Warehouse |
| Country of Origin | China |
Videos
Sizing Chart
| GENERAL INLINE SKATE SIZING GUIDELINES |
|
|---|---|
| Measure feet with socks on and then reference the model-specific sizing chart. How to Measure Your Feet for Skates How to Try on Skates for Fit How to Choose an Inline Skate |
| POWERSLIDE PHUZION SKATE SIZING CHART Unisex Model Based on US Men's Sizing |
||||
|---|---|---|---|---|
|
PHUZION |
CM |
US Men's |
US Women's | EU |
| 5.5 | 23.6 | 5.5 | 6.5 | 37 |
| 6.0 | 24.2 | 6.0 | 7.0 | 38 |
| 7.0 | 24.8 | 7.0 | 8.0 | 39 |
| 7.5 | 25.5 | 7.5 | 8.5 | 40 |
| 8.0 | 26.1 | 8.0 | 9.0 | 41 |
| 9.0 | 26.8 | 9.0 | 10.0 | 42 |
| 10.0 | 27.5 | 10.0 | 11.0 | 43 |
| 10.5 | 28.2 | 10.5 | 11.5 | 44 |
| 11.0 | 28.9 | 11.0 | 45 | |
| 12.0 | 29.6 | 12.0 | 46 | |
| 12.5 | 30.3 | 12.5 | 47 | |
