Overview
Powerslide's NEXT Boots - Black. Trinity mounting, so you have a large variety of frames and wheel configurations to pair with. NEXT boots have cutaway wings on the upper shell so that you can change the flex. Comes with replaceable toe guards, dual buckle closures, and heat-moldable MyFit Recall Dual Fit Liners (also molds naturally with skate time). Trinity mounting uses three mounting points that create a channel for the wheels to lower skate for better control and increase stability and power during push-off.
Does not come with mounting bolts, but these are supplied when purchasing Powerslide Trinity Frames. If buying Endless or other trinity frames, you may need to purchase mounting screws separately (Rear Trinity Frame Mounting Screws Torx 12mm and Front Trinity Frame Mounting Screw Torx 13.5mm).
OVERVIEW | |
---|---|
Model Year | 2019 |
Skate Type | Urban |
Skill Level | Intermediate and Better |
Weight | 850g (Size 42/43) |
Specifications
KEY TECHNOLOGIES | |
---|---|
Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. |
BOOTS | NEXT Boots |
---|---|
Construction | Glass-Fiber Reinforced Plastic |
Cuff | Medium V-Cut |
Liners | MYFIT Recall Dual Fit Liner |
Heat Moldable | Yes |
Closures | Cuff Buckle 45° Micro-Adjustable Ratchet Buckle Standard Lacing |
Mounting | Trinity X |
Sizing Chart
GENERAL SKATE SIZING GUIDELINES |
|
---|---|
Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
Unisex model displayed in Men's sizing. Use foot measurement to determine size (add .5cm for room at toe). |
Next Size | CM | EU |
---|---|---|
5.0 - 5.5 | 22.9 - 23.6 | 36 - 37 |
6.0 - 7.0 | 24.2 - 24.8 | 38 - 39 |
7.5 - 8.0 | 25.5 - 26.1 | 40 - 41 |
9.0 - 10.0 | 26.8 - 27.5 | 42 - 43 |
10.5 - 11.0 | 28.2 - 28.9 | 44 - 45 |
12.0 - 12.5 | 29.6 - 30.3 | 46 - 47 |
13.0 - 13.5 | 30.9 - 31.5 | 48 - 49 |