Overview
The Powerslide Next Core 80 Skates - Black has an extremely versatile design with customizable elements to the boot and Trinity Frame Mounting which is compatible with a lot of different frame options if wanting to change later on.
The Next boots have been a staple for urban skaters to get onto the roads with a lightweight and durable shell. They have three closures to lock your feet in with standard lacing, an adjustable cuff buckle, and a velcro strap that holds your heel in place. Inside they have Basic Dual-Fit Liners that are super comfortable with MYFIT Recall memory foam that hugs your foot. Down below they have very strong, 3D-casted ADC10 aluminum frames that use Trinity 3-point mounting. The Trinity mounting brings your foot closer to the ground which makes you feel more stable and provides better power-transfer by connecting closely to your major pressure points. Inside those frames, they hold 4x80mm Powerslide Spinner wheels and Wicked ABEC9 bearings which provide an excellent roll. A brake is not included however, they are compatible with Powerslide HABS Brake Mount SM/MD.
| Model Year | 2024 |
|---|---|
| Skate Type | Urban |
| Skill Level | Intermediate and Better |
| Weight | 1690g (US 9.0-10.0 EU 42-43) |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. |
| BOOTS | |
|---|---|
| Construction | NEXT Hard Boot |
| Cuff | Medium |
| Liners | Basic Dual-Fit Liners |
| Heat Moldable | Yes |
| Closures | Micro Adjustable Cuff Buckle 45-Degree Velcro Strap Standard Lacing |
| Mounting | Trinity |
| FRAMES | Powerslide Elite |
|---|---|
| Material | ADC10 Aluminum |
| Mounting | Trinity |
| Length | Sizes 5.0 (36) - 10.0 (43) 9.6" 243mm (Max 80mm) Sizes 10.5 (44) - 15.0 (49) 10.8" 275mm (Max 90mm) |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 4x80mm |
| Max Wheel Size | 80mm |
| Axles | One-Piece 8mm, 4mm Hex |
| COMPONENTS | |
|---|---|
| Wheels | Powerslide Spinner 80mm 88A |
| Bearings | Wicked ABEC9 |
| Brake | Not Included Compatible with Powerslide HABS Brake Mount SM/MD. |
| Axle for Brake Removal | Not Included |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 908434 |
| Time | 2 Years |
| Contact | Inline Warehouse |
| Country of Origin | China |
Videos
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. |
| Next Size | CM | EU |
|---|---|---|
| 5.0 - 5.5 | 22.9 - 23.6 | 36 - 37 |
| 6.0 - 7.0 | 24.2 - 24.8 | 38 - 39 |
| 7.5 - 8.0 | 25.5 - 26.1 | 40 - 41 |
| 9.0 - 10.0 | 26.8 - 27.5 | 42 - 43 |
| 10.5 - 11.0 | 28.2 - 28.9 | 44 - 45 |
| 12.0 - 12.5 | 29.6 - 30.3 | 46 - 47 |
| 13.0 - 13.5 | 30.9 - 31.5 | 48 - 49 |
