Overview
The Powerslide Next Core 110 Skates in classic black and white, have the features and customization of the tried and true Next boot, with the speed and agility of short 3x110mm frames for thrill-tastic urban skating adventures.
Next Boots are complimented by cuffs that are height-adjustable to adjust ankle support, with cutout lines should you want to adjust their flex. The boots are paird with Kizer Clipper Cuff Buckles and 45-degree velcro strap. TRINITY frame mounting creates a channel for the wheels, bringing the wheels as close to the foot as possible, and the skates as low to the ground as possible for enhanced stability, control, and energy transfer. Inside are Basic Dual-Fit Liners that are reliable and comfortable. Trinity Elite 3D Cast Aluminum Frames are packaged with Spinner 110mm 88A Wheels and Wicked ABEC9 Bearings.
No brake included. Compatible with
Powerslide HABS Brake Mount SM/MD (Sizes 5.0-10.0) or HABS Syncro Mount (Sizes 10.5-12.5)
| Model Year | 2024 |
|---|---|
| Skate Type | Urban |
| Skill Level | Intermediate and Better |
| Weight | 1750g (US 9.0-10.0 EU 42-43) |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. |
| BOOTS | Next |
|---|---|
| Construction | Hard Boot |
| Cuff | Next Cuff (Adjustable and Customizable) |
| Liners | Basic Dual-Fit |
| Heat Moldable | No |
| Closures | Cuff Buckle 45 Degree Velcro Strap Standard Lacing |
| Mounting | Trinity X |
| FRAMES | Powerslide Elite |
|---|---|
| Material | ADC10 Aluminum |
| Mounting | Trinity |
| Length | 9.6” - 243mm Axle to Axle (Sizes 36-43) 10.6” - 270mm Axle to Axle (Sizes 44-47) |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 3x110mm |
| Max Wheel Size | 110mm |
| Axles | One-Piece 8mm (520020) |
| COMPONENTS | |
|---|---|
| Wheels | Spinner 110mm 88A |
| Bearings | Wicked ABEC9 |
| Brake | Not Included Sizes 5.0-10.0 (36-43) use PS HABS Brake Mount S/M Sizes 10.5-12.5 (44-47) use PS HABS SYNCRO Mount |
| Axle for Brake Removal | Not Included |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 908437 |
| Time | 2 Years |
| Contact | Inline Warehouse |
| Country of Origin | China |
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| The unisex model is displayed in Men's sizing. |
| Next Size | CM | EU |
|---|---|---|
| 5.0 - 5.5 | 22.9 - 23.6 | 36 - 37 |
| 6.0 - 7.0 | 24.2 - 24.8 | 38 - 39 |
| 7.5 - 8.0 | 25.5 - 26.1 | 40 - 41 |
| 9.0 - 10.0 | 26.8 - 27.5 | 42 - 43 |
| 10.5 - 11.0 | 28.2 - 28.9 | 44 - 45 |
| 12.0 - 12.5 | 29.6 - 30.3 | 46 - 47 |
