Overview
Powerslide Arise Marathon Racing Skates. High-cut, high-performance boots with great lateral support (no plastic cuff). Meant for those transitioning to a speed boot, but its performance and feel have many looking no further. It skates like a speed boot, but it is just higher and more supportive. The shell uses Powerslide's tight fitting XXX speed boot last with a comfortable microfiber lining and heat moldable carbon. Combined with Trinity Elite Magnesium Frames (removable - adjustable), they are lightweight, stiff and response. A great choice for distance skaters. UnderCover Raw 125mm 85A wheels have a new and improved, high-rebound race quality urethane (Wicked ABEC9).
Trinity mounting uses a winged mount under the ball of the foot. It provides the perfect balance , control and power transfer. Trinity X boots allow for frame adjustment front to back, and side to side.
Model Year | 2021 |
---|---|
Skate Type | Speed |
Skill Level | Advanced and Expert |
Weight | 1275g (US 8.0 EU 41) |
Specifications
KEY TECHNOLOGIES | |
---|---|
Trinity X Mounting The combination of the 'along' mounting block of the boot with the 'across' mounting slot of the frame. This allows for frame adjustment both laterally (7mm) and front to back (8mm) to individual preference and/or to correct ankles from wanting to roll (pronation/supination). Trinity frames mount at three points with two off-set winged mounts under the ball of the foot that creates a channel for the wheels to lower the skate, adding stability and power at push-off. |
Model Year | 2021-2022 |
---|---|
Skate Type | Cross-Training |
Skill Level | Intermediate and Better |
Weight | 1520g (US 8.0 EU 41) |
BOOTS | |
---|---|
Construction | Hybrid Carbon Hand Lasted |
Cuff | Carbon, Fiber Glass, and Basalt Low |
Liners | Built-in Liner with Microfiber Lining |
Heat Moldable | Yes |
Closures | 45 Degree Ratchet Buckle Waxed Laces |
Mounting | Trinity X |
FRAMES | Elite |
---|---|
Material | AM 60B Magnesium |
Mounting | Trinity |
Length | 12.5” Axle to Axle (318mm) |
Removable | Yes |
Adjustable | Laterally (Front to Back with Trinity X Boots) |
Stock Wheel Setup | 3x125mm |
Max Wheel Size | 125mm |
Axles | One-Piece 8mm, Torx T25 |
COMPONENTS | |
---|---|
Wheels | Undercover Raw 125mm 85A |
Bearings | Wicked ABEC9 |
Brake | Not Included Compatible with HABS (Height Adjustable Brake System) L/XL |
Axle for Brake Removal | Not Included |
Skate Tool | Included (T25 Torx) |
MANUFACTURER and WARRANTY INFORMATION | |
---|---|
Model Number | 904581 |
Time | 2 Years |
Contact | Inline Warehouse |
Country of Origin | China |
Videos
Sizing Chart
GENERAL SKATE SIZING GUIDELINES | |
---|---|
Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
Unisex model. Use foot measurement to determine size. Add .5-1.0 for wide feet. |
Arise Size | CM | EU |
---|---|---|
6.0 | 24.0 | 38 |
7.0 | 24.5 | 39 |
7.5 | 25.3 | 40 |
8.0 | 25.9 | 41 |
9.0 | 26.6 | 42 |
10.0 | 27.3 | 43 |
10.5 | 27.9 | 44 |
11.0 | 28.7 | 45 |
12.0 | 29.4 | 46 |
Previous Feedback
Comments: Extremely disappointed with my arise marathon skates. Not fast at all. In fact I'm certain that my rollerblade 4 WHD macro blades With worn out wheels and uncleaned bearings are faster. What's more the brake system that I bought with the skate does not fit properly at all I could only get one screw to go in up top and during my skate the entire mechanism came loose and was rubbing my wheel
From: Anonymous, 7/24/21
Comments: The skates fit well but the shoelaces are 6 inches too short for each skate. It was nearly impossible to tie the stubs.
From: Anonymous, 12/6/21