Overview
Luigino Strut Inline Speed Boots. A good first speed boot or for those wanting peace of mind in knowing they are getting good quality at a good price. The Strut has been around for years, but it has gotten some updates along the way. So try them again for the first time.
Updated was a modified carbon shell (with nano buckles) that can now mount 3x125mm and be molded with Aqua Tech (instruction in box). Luigino's Barefoot Technology assures a close wrap post-molding for great energy transfer. Multiple color options to choose from. Small sizes (EU30-36 or Y12-4.0) are 2pt 165mm mount spacing. All other sizes are 195mm mount.
- Type: Speed or Race
- Skill Level: Advanced and Expert
- Fit Guideline: Heat molding required - Will not be comfortable right out of the box.
- Sizing Guideline: Not true to size. Small sizes tend to run large while large sizes run small. Use Luigino sizing chart.
Specifications
- Model #: STRUT
- Model Year: 2017
- Upper / Shell:
- 5mm Higher Cut Cuff Than Traditional Luigino Speed Boots
- Adds support and stability to work with wider range of skaters.
- Blended Carbon Fiber Shell to Allow up to 125mm Wheels (New)
- ProBack Technology
- Molded, pre-shaped latex foam in tendon area.
- Secures foot in right and tight with more comfort.
- Barefoot Technology (BFT)
- Based on a natural fit philosophy
- Works off natural position of foot for a more true fit.
- BFT motion control supports natural muscular system
- Helps reach optimal performance
- Ultimate in comfort and stability
- Heat Moldable
- Moldable in Oven or Via AquaTech™ Molding
- High Density Sole Padding
- Poron Ankle Padding
- Vertical Mounting Slots
- SBR Ankle Padding
- 165mm or 195mm - Depends on Skate Size Ordered (see below)
- Closures:
- Waxed Laces (New)
- Nano Buckle (New)
- Mounting:
- Sizes Yth 13 through 4.0 (EU30 - EU36)
- 165mm
- Sizes 5.0 and up (EU37 - EU47)
- 195mm
- Weight: 406g
- Single boot weight without frames/wheels/bearings
Videos
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES |
|
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| Luigino boots are NOT true to size. Small sizes run large and large sizes run small. I know right? Use foot measurement (add .5cm for room at the toe) to determine size. |
| Luigino Size | CM | EU |
|---|---|---|
| Y12 | 18.8 | 30 |
| Y13 | 19.5 | 31 |
| 1.0 | 20.2 | 32 |
| 1.5 | 20.9 | 33 |
| 2.0 | 21.6 | 34 |
| 3.0 | 22.3 | 35 |
| 4.0 | 23.0 | 36 |
| 5.0 | 23.7 | 37 |
| 6.0 | 24.4 | 38 |
| 7.0 | 25.1 | 39 |
| 8.0 | 25.8 | 40 |
| 9.0 | 26.5 | 41 |
| 10.0 | 27.4 | 42 |
| 11.0 | 28.1 | 43 |
| 12.0 | 28.8 | 44 |
| 13.0 | 29.5 | 45 |
| 14.0 | 30.2 | 46 |
| 15.0 | 30.9 | 47 |
Other Items to Consider
Similar Items
Customer Reviews
After heat molding these boots are my new favorites, snug without pressure points, can wear them for hours.
Previous Feedback
Comments: Excellent material and comfortable boot
From: Hernan, West Hollywood, CA, 10/21/20