Overview
The Luigino Bolt Pro Inline Speed Boots are designed for the pure racer with all of Luigino's most technologically advanced performance features available. The full carbon fiber shell is made of Luigino's own Thermafiber blend to ensure optimal stiffness for the best power transfer. An extremely close fit is possible due to Luigino's Barefoot Technology (BFTR122), a unique shape last that offers a true fit based on a 'Natural Fit' philosophy that reduces interior foot deformity. To enhance the fit, these boots are heat-moldable via AquaTech or the oven to eliminate hot spots and/or pressure points. Other features such as the ProBack tendon design provide a snug heel lock, and the Pro-E sole footbed relaxes the foot and allows more foot to base contact, improving response and comfort.
- Type: Speed or Race
- Skill Level: Advanced and Expert
- Fit Guidelines: Heat molding required (oven or AquaTech).
- Sizing Guidelines: Not true to size. Small sizes run a little big and large sizes small. Use measurement with Luigino sizing chart.
Specifications
- Upper / Shell:
- 100% Carbon Fiber
- Pro-E Soles
- Incorporates anatomically correct sole into the bed of the foot
- Maximizes comfort and positions feet properly.
- Contoured for comfort and support
- Relaxes the foot allowing more contact with boots.
- Helps reduce fatigue and/or pain.
- Increases support, stability and comfort.
- ProBack Technology
- Molded, pre-shaped latex foam in tendon area.
- Secures foot in right and tight with more comfort.
- Barefoot Technology (BFT)
- Based on a natural fit philosophy
- Works off natural position of foot for a more true fit.
- BFT motion control supports natural muscular system
- Helps reach optimal performance
- Ultimate in comfort and stability
- Heat Moldable
- Moldable in Oven
- Moldable using wather - AquaTech™ Molding
- Most comprehensive method
- Eliminates hot and cold spots
- Increases shell stiffness, longevity and moldability from arch to top of ankle.
- Thermafiber Composite Construction
- Reduces Shell Weight
- Increases Shell Strength and Rigidity
- High Density Sole Padding
- Vertical Mounting Slots
- Closed Cell Ankle Padding
- More Open Toe Box
- 195mm Mounting
- Supports Most 125mm Racing Frames
- Closures:
- Waxed Laces
- Luigino Nano Buckled Powerstrap
- Keep heel in cup position
- Weight: 431g
- Single boot weight, Size EU 41
Videos
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES |
|
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| Luigino boots are NOT true to size. Small sizes run large and large sizes run small. Use foot measurement (add .5cm for room at the toe) to determine size. |
| Luigino Size | CM | EU |
|---|---|---|
| Y12 | 18.8 | 30 |
| Y13 | 19.5 | 31 |
| 1.0 | 20.2 | 32 |
| 1.5 | 20.9 | 33 |
| 2.0 | 21.6 | 34 |
| 3.0 | 22.3 | 35 |
| 4.0 | 23.0 | 36 |
| 5.0 | 23.7 | 37 |
| 6.0 | 24.4 | 38 |
| 7.0 | 25.1 | 39 |
| 8.0 | 25.8 | 40 |
| 9.0 | 26.5 | 41 |
| 10.0 | 27.4 | 42 |
| 11.0 | 28.1 | 43 |
| 12.0 | 28.8 | 44 |
| 13.0 | 29.5 | 45 |
| 14.0 | 30.2 | 46 |
| 15.0 | 30.9 | 47 |
