Frame Mounting Bolts & Accessories

Frame mounting bolts for BONT boots. Package contains 4 mounting bolts.

 

These 1mm carbon wedges interlock and can stack on top of each other to be placed between your boots and frames. Placing the wedges in various spots at various heights tilts the frame to correct supination or pronation, to help gain a better edge on your wheels, or to stack in a block to change pitch. 

Luigino Rubber No-Slip Frame Mounting Pads help keep frames from sliding out of place during alignment adjustments, making it easier to lock your frames in the perfect position. Once tightened down, the pads continue to help out by reducing any slipping during your stride so that you have a consistent feel while skating. The 3M, self adhesive backing makes for quick and easy installation.

• Price is for a pack of 4
• Rounded Rear Pads (2)
• Square Front Pads (2)

Frame mounting bolts for inlinen skate frames. They are designed and measured to work with Luigino inline skate boots, but can work with many other brands of boots as well. Sold in a 5pk.

The Powerslide Frame Mount Bolt Screw Torx Small Head 12mm are great for replacing your lost mounting bolts. They are made of high-grade steel to fit M6 standard threads.

Replacement mounting bolts from Powerslide can be used on Powerslide frames and most others. These are sold individually and can be used for 2pt mount frames, or the rear position of trinity mount frames.

The Trinity Adapter converts regular two-point frame mount skates to trinity mount! Works on boots that have the heel pitched higher than the toe (9-13mm). In other words, it DOES NOT work on flat outsoles. Hardware included.

Replacement mounting bolts from Powerslide that can be used with many brands of boots and frames. They can be used for 2pt mount frames, or the front (winged portion) two positions to mount trinity frames.

The Powerslide Frame Control Inserts adjust the angle of the frame in how it mounts to the boot. These are another helper that will change dynamics in conjunction with front to back or side to side frame adjustments. The wedges go between the boot and the frame to help create a longer push, prevent ankle roll (pronation or supination), or just offset bad foot position to create better comfort. 

 

Mounting bolts for Seba Skates and FR Skates having the 7-position mounting plates in the base of the boot. Price is for a single bolt. 

 

The Kizer Superbolts Frame Mounting Bolts are low-volume mounting screws made for hex keys. Have you ever stripped a screw? These allow for a socket to fit around them as well. Super! The pack of 12 includes 12mm (4), 15mm  (4), and 18mm (4). They will work with most 2pt mount and UFS frames.

The Razor Cult UFS Frame Mounting Bolts Kit contain round washers T-Nuts and screw bolts needed to attach a pair of UFS frames to the Razors Cult Skates.  They are more specific to the Razors Cult as the back mounting bolt is much longer than most mounting bolts. 

The Endless Frame Lock Set comes in a set of 8. They work to help lock your frame mounting bolts with the frames by filling that oblong shape on the tops of frames. Replace other mounting washers or spacers by using these in the frame mounting slots to prevent wiggle room. For use on Endless Frames and other brands.

Ground Control Frame Mounting Bolts come in packs of four and are offered in three different lengths (shown when available).  They use M6 threading which is common across brands, so just grab the length that works for your needs.

The Iqon ACT 165 Conversion Mount Adapter allows you to take your IQON ACT boot and make it compatible with standard 2pt 165mm frame mounting.

The Iqon ACT Trinity Conversion Mount Adapter is a lightweight attachment that convert the mounting on the IQON ACT boot to allow for trinity frame mounting.