Overview
The FR Skates FR1 80 Skates in Grey Blue are fresh and come in a cool colorway in one of the best urban freeskating skates. The boots have integrated aluminum frame mounting blocks that allow for 7 different mounting positions. The plastic mold is very durable and responsive with removable liners. The liners are very padded inside to eliminate any negative space but break-in nicely.
The cuffs allow you to customize their fit with cuff bolts that adjust to four different positions. Thy have a metal cuff, standard lacing, and ratchet 45-degree buckles that support their fit. The 4D extruded aluminum frames are strong and reliable with Street Invader II 84A Wheels and TwinCam Bearings inside. No brake included (compatible with FRW 4W Brake Mount.
If you are looking for a specific part, check out the FR Skates FR1 80 Parts List.
Shop all FR Skates Parts here.
| OVERVIEW | |
|---|---|
| Skate Type | Urban |
| Skill Level | Intermediate and Better |
| Weight | 1,694g (Size US 8.0) |
Specifications
| BOOTS | |
|---|---|
| Construction | Molded Plastic |
| Cuff | Medium Adjustable to 4 Positions |
| Liners | Removable Drylex Memory Foam Heel Shock Pad |
| Heat Moldable | No |
| Closures | Metal Cuff Buckle 45 Degree Metal Ratchet Buckle Standard Lacing |
| Mounting | 135mm, 150mm, 165mm, 180mm, 195mm |
| FRAMES | |
|---|---|
| Material | 4D Extruded Aluminum Frames |
| Mounting | 165mm, 180mm, 195mm |
| Length | 9.5” Axle to Axle (243mm) |
| Removable | Yes |
| Adjustable | Yes |
| Stock Wheel Setup | 4x80mm |
| Max Wheel Size | 80mm |
| Axles | One-Piece 8mm, 4mm Hex |
| COMPONENTS | |
|---|---|
| Wheels | FR Street Invader II 80mm 84A |
| Bearings | TwinCam MW9 Skate Bearings |
| Brake | Not Included Compatible with FRW 4W Brake Mount |
| Axle for Brake Removal | Not Included |
| Skate Tool | Included |
| MANUFACTURER and WARRANTY INFORMATION | |
|---|---|
| Model Number | 22FRSK-FR180-GB |
| Time | 1 Year |
| Contact | Inline Warehouse |
| Country of Origin | China |
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES | |
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| FR liners break in with skate time to free up more room. A snug fit from the start is good. * FR is doing a running change to adjust the US size on these sizes to more closely correspond with the measurements for that size. The skate box (or tongue) may read either US size during this change, but the sizing of the skate is the same (EU, MP, and CM). |
| FR Skate Size | EU | CM | Shell EU |
|---|---|---|---|
| 3.0 | 34 | 22.0 | 35 |
| 4.0 | 35 | 22.5 | 35 |
| 4.5 | 36 | 23.0 | 37 |
| 5.0 | 37 | 23.5 | 37 |
| 6.0 | 38 | 24.5 | 39 |
| 7.0 | 39 | 25.5 | 39 |
| 7.5 | 40 | 26.0 | 40 |
| 8.0 | 41 | 26.5 | 42 |
| 9.0 | 42 | 27.0 | 42 |
| 10.0 | 43 | 27.5 | 44 |
| 10.5 | 44 | 28.0 | 44 |
| 11.0 / 11.5* | 45 | 28.5 | 47 |
| 12.0 | 46 | 29.5 | 47 |
| 13.0 /13.5* | 47 | 30.0 | 47 |
