Up to 30% lighter than stock steel! Comes with a dual radius of 9' and 10', for out-of-the-box stability and control.
The Byonic Multi-Flyte Pro-X Polished Red Steel Runners were formed with an incredibly accurate laser cut profile that has enabled Byonic steel to be up to 30% lighter than all other OEM and aftermarket skate blades. This laser cut process was used on the bottom of the blades to form a precise dual radius of 9' and 10', which gives skaters unparalleled stability, balance, and control right out of the box.
The upper profile is where Byonic was able to laser cut the weight savings and simultaneously create a patented design in which these blades can fit in three different quick-release OEM holders from the two leading brands. With this all-new multi-fit design, players or teams can now seamlessly use or swap out a Byonic runner with the Bauer Tuuk LS Edge, Bauer PowerFly, and CCM XS holders!
Each Byonic runner is made with certified high-strength stainless steel that provides maximum edge life, impact resistance, and increased power transfer. This model has a highly polished surface with a cosmetic red coating that lets you add some personal style to your skates while increasing glide to help players conserve energy shift after shift.
IW can have your skate blades delivered profiled, sharpened, and game-ready with Elite Blade Performance technology! Choose custom profiles like Double, Triple, Quad, SCS, and Polaris to boost speed, stability, and agility. We offer various sharpening options and an Express Mail-In service. Select your profile and sharpening hollow when adding a blade to your cart. Learn about Elite Blade Performance Services here, choosing the right profile here, and selecting the right sharpening hollow here.
OVERVIEW | |
---|---|
Model Number | BYXSCR |
Skate Compatibility | CCM Player Skates with the XS Holder (2019+) Bauer Player Skates with Bauer Tuuk LS Edge Holder (2013+) Bauer Player Skates with Bauer PowerFly Holder (2023+) |
Holder Compatibility | CCM SpeedBlade XS Bauer Tuuk LS Edge Bauer PowerFly Not Compatible with True or Graf Holders |
Skate Size Compatibility | 6 - 10.5 |
Includes | Complete set of runners (left and right) |
Installation Instructions | Ensure your holder's quick-release mechanism is fully compressed/retracted to install Byonic Multi-Fit skate blades properly. |
Specifications
KEY TECHNOLOGIES | |
---|---|
Dual Profile A 9' radius on the front improves acceleration and turning while the 10' radius on the rear portion of the blade increases stability and balance through each stride and battles along the board. Together, this profile combination maximizes blade contact with the ice in different skating positions. | |
21mm Blade Height Taller than standard OEM runners, this added height provides tighter turns, harder stops, and extends the sharpening lifespan over standard steel runners. | |
XLITE Upper Profile This patented design from Byonic is cut with laser precision that allows the runner to fit the three biggest quick-release OEM Holders on the market; CCM XS, Bauer LS Edge and the Bauer PowerFly. This steel is also up to 30% lighter than leading OEM and aftermarket skate blades. |
CONSTRUCTION | |
---|---|
Steel Grade | High-Grade |
Blade Finish | High Polish with Red Coating |
Blade Height | 21mm (Size U9 Runner) |
Blade Profile | Dual Blade Profile (9'-10') |
Product Note | All blades are independently measured at IW Hockey with a 5% variance. |
Sizing Chart
HOW TO FIND YOUR SKATE BLADE SIZE | |
---|---|
Take your current hockey skates and identify the three-digit number, which can be found on either the heel side of your blade holder or on the blades themselves. Locate your three-digit number in either the Bauer Edge and PowerFly or CCM XS Holder charts below to find your Byonic Runner size. If for any reason you cannot locate the number, see our How to Size a Hockey Skate Blade and Holder article for a more in-depth approach to skate blade sizing and skate blade compatibility. |
BAUER EDGE AND POWERFLY HOLDERS - BYONIC RUNNER SIZING CHART | |||
---|---|---|---|
Runner Size | Skate Size (D-Width, Fit 1&2) |
Skate Size (EE-Width, Fit 3) |
Holder Size |
M4 | 4.0 - 4.5 | 4.0 - 4.5 | 238mm/Jr 4 |
M5 | 5.0 - 5.5 | 5.0 | 246mm/Jr 5 |
M6 | 6.0 - 6.5 | 5.5 - 6.0 | 254mm/Sr 6 |
M7 | 7.0 - 7.5 | 6.5 - 7.0 | 263mm/Sr 7 |
M8 | 8.0 - 8.5 | 7.5 - 8.0 | 272mm/Sr 8 |
M9 | 9.0 - 9.5 | 8.5 - 9.0 | 280mm/Sr 9 |
M10 | 10.0- 10.5 | 9.5 - 10.0 | 288mm/Sr 10 |
Installation Instructions: Ensure your holder's quick-release mechanism is fully compressed/retracted to install Byonic Multi-Fit skate blades properly. |
COMPATIBLE BAUER SKATES (2013 - PRESENT) | ||
---|---|---|
Year | Family | Model |
2024 | Supreme | Shadow, M50 Pro, M40, M30 |
2023 | Vapor | HyperLite 2, X5 Pro, X4, X3 |
2022 | Supreme | Mach, M5 Pro, M4, M3 |
2021 | Vapor | HyperLite, 3X Pro, 3X, X3.7 |
2020 | Supreme | Ultrasonic, 3S Pro, 3S, S37, S35 |
2019 | Vapor | 2X Pro, 2X, X2.9, X2.7, X2.5 |
2018 | Supreme | 2S Pro, 2S, S29, S27, S25 |
2018 | Nexus | 2N, N2900, N2700 |
2017 | Vapor | 1X, X900, X800, X700, X600, X500 |
2016 | Nexus | 1N, X9000, N8000, N7000 |
2016 | Supreme | 1S, S190, S180, S170, S160 |
2015 | Vapor | 1X, X900, X800, X700, X600, X500 |
2014 | Nexus | 8000, 7000, 6000, 5000 |
2014 | Supreme | MX3, 190, 180, 170, 160 |
2013 | Vapor | APX2, X100, X90, X80, X70, X60 |
CCM XS HOLDER - BYONIC RUNNER SIZING CHART | ||
---|---|---|
Runner Size | Skate Size (D&EE-Width, Tapered, Regular, Wide) |
Holder Size |
M4 | 4.0 - 4.5 | 238mm |
M5 | 5.0 - 5.5 | 247mm |
M6 | 6.0 - 6.5 | 255mm |
M7 | 7.0 - 7.5 | 263mm |
M8 | 8.0 - 8.5 | 271mm |
M9 | 9.0 - 9.5 | 280mm |
M10 | 10.0 - 10.5 | 287mm |
Installation Instructions: Ensure your holder's quick-release mechanism is fully compressed/retracted to install Byonic Multi-Fit skate blades properly. |
COMPATIBLE CCM SKATES (2019 - PRESENT) | ||
---|---|---|
Year | Family | Model |
2024 | Tacks | XF Pro, XF, XF, XF90, XF80, XF70, Classic SE, Classic |
2023 | JetSpeed | FT6 Pro, FT6, FT680, FT670 |
2022 | Tacks | AS-V Pro, AS-V, AS-580, AS-570 |
2021 | JetSpeed | FT4 Pro, FT4, FT485, FT475 |
2021 | RibCor | 100K Pro, 90K, 88K, 86K |
2020 | Super Tacks | AS3 Pro, AS3, 9380, 9370 |
2019 | JetSpeed | FT2, FT490, FT480, FT470, FT460 |
2019 | RibCor | 80K, 78K, 76K |