Overview
The Bladetech Lightspeed Edge 24K Gold Steel Runners are incredibly strong thanks to the gold coating that provides performance similar to Bladetech's DLC blades. This premium coating extends the lifespan of the runner because of its ability to fight off nicks, chips, corrosion, and scratches. Not only that but it holds an edge longer than standard runners and reduces friction to improve your glide.
Unique to Bladetech is Flex-Force technology, a patented design in which the front of the runner flexes up into the holder. Energy is stored and released upon your stride, boosting your speed and acceleration by up to 5%! It even gives players health benefits by reducing stress on the knee joints where all that vertical energy would normally be absorbed.
Lastly, the runners come pre-profiled so that the blades maintain better ice contact in all skating positions. This improves stability, glide, acceleration, stopping and turning over standard stock profiles.
IW can have your skate blades delivered profiled, sharpened and game-ready! With custom blade profile options including Zuperior, Quad and Ellipse, you can immediately improve your speed, stability and agility compared to stock flat profiles. We also offer a wide range of sharpening options and when it is time for a fresh profile or edge tune-up, use our Express Mail-In Skate Blade Profiling and Sharpening service. Select your blade profile and sharpening hollow when you add a blade to your cart. Learn even more here.
| OVERVIEW | |
|---|---|
| Model Number | BTLSEG |
| Skate Compatibility | Bauer Player Skates with the Edge Holder (2013+) |
| Holder Compatibility | Tuuk Lightspeed Edge Holder Bladetech Runners may fit shorter than the actual holder size but still fit securely and perform as described. |
| Skate Size Compatibility | 1 - 12 |
| Includes | Complete set of runners (left and right) |
Specifications
| KEY TECHNOLOGIES | |
|---|---|
| Official Blade of the American Collegiate Hockey Association (ACHA) Bladetech Hockey has been named the Preferred Skate Blade Partner of the ACHA. Through this partnership, Bladetech Hockey’s patented Flex Force Advantage skate blade will now be available to power ACHA players with customized stainless-steel runners. |
|
| Flex-Force A patented blade design that allows the front portion of the runner to flex up into the holder of your skates. This stores the vertical energy and releases it when you extend your stride, increasing your speed and maximizing acceleration. |
|
| Gold Coating A premium gold coating material that provides properties similar to Bladetech's DLC coating, resulting in a runner with incredible strength against nicks, scratches, and chips. This coating also greatly increases blade retention, corrosion resistance, and even glide. |
|
| 22mm Blade Height Taller than standard OEM runners, this added height provides tighter turns, harder stops, and extends the sharpening lifespan over standard steel runners. |
| CONSTRUCTION | |
|---|---|
| Steel Grade | Premium-Grade |
| Blade Finish | Gold Coating |
| Blade Height | 22mm (Size 280mm Runner) |
| Blade Profile | Triple Blade Profile (9'-10'-11') |
| Product Note | All blades are independently measured at IW Hockey with a 5% variance. |
Videos
Sizing Chart
| HOW TO FIND YOUR SKATE BLADE SIZE | |
|---|---|
| Take your current hockey skates and identify the three-digit number, which can be found on the heel side of your blade holder or on the blades themselves. Locate your three-digit number in the sizing charts below to find your Bladetech Edge Runner size. If for any reason you cannot locate the number, see our How to Size a Hockey Skate Blade and Holder article for a more in-depth approach to skate blade sizing and skate blade compatibility. |
| JUNIOR - BLADETECH EDGE RUNNER SIZING CHART |
||||
|---|---|---|---|---|
| Runner Size | Skate Size (D-Width, Fit 1&2) |
Skate Size (EE-Width, Fit 3) |
Edge Holder Size | Profile & Radius |
| 212mm | 1.0 - 1.5 | 1.0 - 1.5 | Jr 1 | Triple (9'-10'-11') |
| 221mm | 2.0 - 2.5 | 2.0 - 2.5 | Jr 2 | Triple (9'-10'-11') |
| 230mm | 3.0 - 3.5 | 3.0 - 3.5 | Jr 3 | Triple (9'-10'-11') |
| 238mm | 4.0 - 4.5 | 4.0 - 4.5 | Jr 4 | Triple (9'-10'-11') |
| 246mm | 5.0 - 5.5 | 5.0 | Jr 5 | Triple (9'-10'-11') |
| SENIOR - BLADETECH EDGE RUNNER SIZING CHART | ||||
|---|---|---|---|---|
| Runner Size | Skate Size (D-Width, Fit 1&2) |
Skate Size (EE-Width, Fit 3) |
Edge Holder Size | Profile & Radius |
| 254mm | 6.0 - 6.5 | 5.5 - 6.0 | Sr 6 | Triple (9'-10'-11') |
| 263mm | 7.0 - 7.5 | 6.5 - 7.0 | Sr 7 | Triple (9'-11'-13') |
| 272mm | 8.0 - 8.5 | 7.5 - 8.0 | Sr 8 | Triple (9'-11'-13') |
| 280mm | 9.0 - 9.5 | 8.5 - 9.0 | Sr 9 | Triple (9'-11'-13') |
| 288mm | 10.0 - 10.5 | 9.5 - 10.0 | Sr 10 | Triple (9'-11'-13') |
| 296mm | 11.0 - 11.5 | 10.5 - 11.0 | Sr 11 | Triple (9'-11'-13') |
| 306mm | 12.0 | 11.5 - 12.0 | Sr 12 | Triple (9'-11'-13') |
| COMPATIBLE BAUER SKATES (2013 - PRESENT) | ||
|---|---|---|
| Year | Family | Model |
| 2023 | Vapor | X4, X3 |
| 2022 | Supreme | Mach, M5 Pro, M4, M3 |
| 2021 | Vapor | HyperLite, 3X Pro, 3X, X3.7 |
| 2020 | Supreme | Ultrasonic, 3S Pro, 3S, S37, S35 |
| 2019 | Vapor | 2X Pro, 2X, X2.9, X2.7, X2.5 |
| 2018 | Supreme | 2S Pro, 2S, S29, S27, S25 |
| 2018 | Nexus | 2N, N2900, N2700 |
| 2017 | Vapor | 1X, X900, X800, X700, X600, X500 |
| 2016 | Nexus | 1N, X9000, N8000, N7000 |
| 2016 | Supreme | 1S, S190, S180, S170, S160 |
| 2015 | Vapor | 1X, X900, X800, X700, X600, X500 |
| 2014 | Nexus | 8000, 7000, 6000, 5000 |
| 2014 | Supreme | MX3, 190, 180, 170, 160 |
| 2013 | Vapor | APX2, X100, X90, X80, X70, X60 |
| HELPFUL ARTICLES | |
|---|---|
| How to Size a Hockey Skate Blade and Holder | |
| How to Select the Correct Skate Sharpening and Profile | |
| ProSharp Profiling and Sharpening Servies |
