Overview
Luigino Challenge Inline Speed Boots. The Challenge is considered by many to be the best-fitting performance boot in the world. It naturally features all of Luigino's advanced boot technologies and they simply look good too. Are you up to the Challenge?
The Challenge is a high-performance, low-profile shoe that maintains its customized fit through Luigino's exclusive AquaTech Heat Molding process. ProBack cuff, high-density sole padding, thermafiber construction, and Luigino's proprietary Barefoot design.
- Type: Speed or Race
- Skill Level: Advanced and Expert
- Fit Guidelines: Heat molding required (oven or AquaTech).
- Sizing Guidelines: Not true to size. Small sizes tend to run large, while large sizes run small. Use foot measurement with the Luigino sizing chart.
Specifications
- Model Year: Released 2012 - Reintroduced Thereafter
- Upper / Shell:
- High-Density Sole Padding
- ProBack Technology
- Molded, pre-shaped latex foam in tendon area.
- Secures foot in right and tight with more comfort.
- Barefoot Technology (BFT)
- Based on a natural fit philosophy
- Works off natural position of foot for a more true fit.
- BFT motion control supports natural muscular system
- Helps reach optimal performance
- Ultimate in comfort and stability
- Heat Moldable
- Moldable in Oven
- Moldable using wather - AquaTech™ Molding
- Most comprehensive method
- Eliminates hot and cold spots
- Increases shell stiffness, longevity and moldability from arch to top of ankle.
- Thermafiber Composite Construction
- Reduces Shell Weight
- Increases Shell Strength and Rigidity
- High Density Sole Padding
- Vertical Mounting Slots
- Closed Cell Ankle Padding
- Microfiber lining
- 195mm Mounting
- Closures:
- Waxed Laces
- Luigino Nano Buckled Powerstrap
- Keep heel in cup position
- Mounting:
- Sizes 5.0 - 15.0 use 195mm Mount Spacing
- Sizes Y13 - 4.0 use 165mm Mount Spacing
- Weight: 13.6 oz based on size 9.0 boot (26.5 cm)
Videos
Sizing Chart
| GENERAL SKATE SIZING GUIDELINES |
|
|---|---|
| Measure both feet with socks similar to those in which you intend to skate. Then use the measurement of the longest point and reference the model-specific size chart to determine size. How to Measure Your Feet for Skates. | |
| Proper fit has the toes not being cramped against the front. Toes may slightly brush the front as heels will settle back when in the skating position. Try on skates indoors while in a seated position. Lace and buckle both skates, tap your heels to the floor, and then stand and bend your knees to simulate the skating position. How to Try on Inline Skates for Fit. | |
| Luigino boots are NOT true to size. Small sizes run large and large sizes run small. I know right? Use foot measurement (add .5cm for room at toe) to determine size. |
| Luigino Size | CM | EU |
|---|---|---|
| Y12 | 18.8 | 30 |
| Y13 | 19.5 | 31 |
| 1.0 | 20.2 | 32 |
| 1.5 | 20.9 | 33 |
| 2.0 | 21.6 | 34 |
| 3.0 | 22.3 | 35 |
| 4.0 | 23.0 | 36 |
| 5.0 | 23.7 | 37 |
| 6.0 | 24.4 | 38 |
| 7.0 | 25.1 | 39 |
| 8.0 | 25.8 | 40 |
| 9.0 | 26.5 | 41 |
| 10.0 | 27.4 | 42 |
| 11.0 | 28.1 | 43 |
| 12.0 | 28.8 | 44 |
| 13.0 | 29.5 | 45 |
| 14.0 | 30.2 | 46 |
| 15.0 | 30.9 | 47 |
