Skate parts for all your needs! We have inline skate axles and brakes as well as brake mounts and buckles for replacement. You can also get skate cuffs and customizable pieces if your skate allows it, as well as inline skate frames, mounting bolts, skate laces and spacers.

Click on each section to see the selection of available parts. Not seeing what you need, call us for further information or to check stock.

Bladerunner Inline Skate Axles

  • This great axle kit has 6mm axles and long sleeved bearing spacers for use with 608 bearings. Being an extender axle, it fits a wide array of brands whether hockey, fitness or aggressive skates. So if using a 6mm axle and having a hard time looking for one under your brand name, this kit can likely bail you out.

Bont Inline Skate Axles

  • Replacement axles for Bont skate frames. Also work work on other frames (Luigino, Vanilla and Powerslide) using one sided 8mm axles, although they may not have the precise fit (length) as they do when used on Bont frames. Have the common 5/16 allen head. 

    • Eight 8mm Axles

     

Luigino Inline Skate Axles

Powerslide Skate Axles

  • The Powerslide Vi Carbon Frame Replacement Axles, 8pk are hollow speed axles with inside M4 thread made for Powerslide Vi Carbon and Vi-Pro Carbon inline skate frames. Torx system axles (star head) so see Powerslide Skate Tool.

    • Compatible with Vi Carbon and Vi-Pro Frames
  • Powerslide inline skate axles are 8mm one-sided axles that are used on many Powerslide frames/skates such as the R2, R4, FSK, Hawk and others. Axle heads are torx (star) head and not the traditional allen, but the tool is included. This axle does NOT fit the Powerslide Vi Magnesium or Vi Carbon frames.

    • 8 Axles
    • Powerslide Star Tool

Roces Inline Skate Axles

  • This great axle kit has 6mm axles and long sleeved bearing spacers for use with 608 bearings. Being an extender axle, it fits a wide array of brands whether hockey, fitness or aggressive skates. So if using a 6mm axle and having a hard time looking for one under your brand name, this kit can likely bail you out.

  • Replacement set of Rollerblade 8mm skate axles for skates using one sided axles that thread into the frame. Meaning there is no male piece, just the one. These axles are used on many of the higher end Rollerblades and some of the urban skates. The more current models are listed below with some older models shown if clicking on the 'specs' tab once image enlarged. Axles also may work on with other brands of frames, but use caution to make sure threads match and length is appropriate. 

    • Works for recent skate models:
      • Tempest 100 and 110
      • Fusion 84, X5, X7, GM
      • Twister 80
    • Item#: 09203000001

Rollerblade Inline Skate Axles

  • The Rollerblade Skate Axles 8mm Recreational 2015 are replacement axles for composite frames of Rollerblade's Recreational skates. Works with the following skate models of current models, two piece axles, sold to support 1 pair of skates.

    • Zetrablade
  • The Rollerblade Triangle Head Skate Axles 8mm for TRS/Blank are the replacement axle for Rollerblade's aggressive skates. Since most TRS skate models use these, and there is only one "style" of these axles produced, it will be easy to identify.

  • Rollerblade 8mm replacement inline skate axles fit a wide variety of Rollerblade brand inline skates. This is a two-piece axle that will fit many Rollerblade skate models. See below for compatibility list. Other models that have aluminum frames may need the Rollerblade One Sided Race Axles or the Rollerblade Aluminum Frame Axles OMEGA.

      • Pro 07, Maxxum 01 (not 2014+ maxxums), Core 07/09, Evo 08/Evo 6.1
      • Lightning 03/07, Astro/Wing
      • Crossfire/Activa 1/2/TFS/90/4d/4.0/6.0/8.0/4D Air/4D Air Carbon/90mx
      • Spark Pro/Platinum 8, Problade Jr
    • Item#: 00935400115
  • Replacement set of Rollerblade 8mm skate axles for skates using one sided axles that thread into the frame. Meaning there is no male piece, just the one. These axles are used on many of the higher end Rollerblades and some of the urban skates. The more current models are listed below with some older models shown if clicking on the 'specs' tab once image enlarged. Axles also may work on with other brands of frames, but use caution to make sure threads match and length is appropriate. 

    • Works for recent skate models:
      • Tempest 100 and 110
      • Fusion 84, X5, X7, GM
      • Twister 80
    • Item#: 09203000001
  • These replacement inline skate axles fit most of the junior adjustable skates from 2006-current, as well as Nylon frame skates through 2003. Comes with 8 regular axles and one brake axles. Skate models include the 2006 Micro/Micro TFS, 2007 Micro 4X/4XG/TFS2 & 2008 Micro 500G/500X/Micro3 TFS, Micro 2 TFS, and Microblade models. Item#09350015

     

  • Rollerblade junior inline skate replacement axles. Package includes 8 regular and 1 brake axle. Fits the below recent model junior Rollerblade inline skates like the Spitfire and LX models.

    • Spitfire XT
    • Spitfire ALU 
    • Spitfire LX

Sonic Universal 6mm Inline Skate Axles

  • The Sonic Universal 6mm Square Axle Extender Kit comes with (8) 6mm extendable axles and (8) long-sleeved spacers. These fit a wide variety of old and new Alkali, Bauer and Mission roller hockey skates. If you are unable to find axles for your older pair of skates with a square-ended axle, this kit is just for you!

  • This great axle kit has 6mm axles and long sleeved bearing spacers for use with 608 bearings. Being an extender axle, it fits a wide array of brands whether hockey, fitness or aggressive skates. So if using a 6mm axle and having a hard time looking for one under your brand name, this kit can likely bail you out.

Rollerblade Skate Brake Mounts

  • The Rollerblade Fusion Brake Mount support the the skates indicated below.  Click for more details:

    • 2014 Fusion 84 GM
    • 2013 and older Fusion X5 / X7
    Colors: 2
  • Replacement inline skate brake mounts or housing for the kids Rollerblade Spitfire models listed below. Click for more details:

    • This brake mount supports all models of Spitfire skates from 2012-2015, EXCEPT 2013 (Rollerblade had different axles for 2013 Spitfires and does not currently have brake mounts that support this change)
      • Spitfire
      • Spitfire LX
      • Spitfire XT
      • Spitfire ALU

     

K2 Inline Skate Brake Mounts

Bont Inline Skate Brake Mounts

Roces Inline Skate Brake Mounts

Roller Derby Inline Skate Brake Pads

Seba Inline Skate Brake Pads

Bont Inline Speed Skate Frames

  • Amongst the lightest in the world, the S-Frame was tested by pro racing teams all over the world. They use the most advanced computer stress testing available. The frames gain exceptional strength from the S in the extrusion. The 3pt Mount works to reduce materials and weight in the boot while creating a low deck height for control and stability. Compatible with Bont 3pt Mount Boots only.

    • 3pt Mount
    • 10.85" 4x90mm
    • 11.92" 4x100mm
    • 12.50" 4x100mm
    • 12.80" 4x100mm
    • 13.20" 4x110mm 
  • Bont Alumunim S-Frames are now offered in black ! Among the lightest in the world, they have been tested by pro racing teams all over the world and some of the most advanced computer stress testing available. The frames gain exceptional strength from the S in the extrusion. The 3pt Mount works to reduce materials and weight in the boot while creating a low deck height for control and stability.

  • Bont 6061 frames mount to any brand boot with 2pt 195mm mount spacing. Rigorously tested, the 6061 Aluminum has anti-corrosive properties to go along with its beautifully expensive looking finish. Tempered for strength with black print for a very refined look. Combine with Bont's 3PF Midpoint to act as a 3pt mount setup. 

    • 195mm Mount
    • 11.25" 4x90mm
    • 12.00" 4x100mm
    • 12.60" 4x100 or 105mm
    • 13.20" 4x110mm
  • Bont 7050 Inline Skate Frames mount to any brand boot with 195mm spacing. Bont used the skater and computer aided testing to ensure this frame will withstand the demands of skaters month after month. 7050 aluminum provides toughness and corrosion resistance. Classified as 7050-T6, the T6 means the frame has been solution heat treated and artificially aged. Engineered to have just a slight amount of flex near the wheels to increase grip at end of push off. Combine with Bont's 3PF Midpoint to act as a 3pt mount setup. 

    • 12.8" 4x100 or 105mm
    • 13.2" 4x110mm
  • The Bont CXXV Inline Skates Frames are constructed like all Bont frames to provide the perfect stiffness through the stride and designed to fit 3x125mm wheels. These aluminum frames will mount with any standard 2-point, 195mm spaced skate boot, instantly upgrading them to race-ready 125mm skates.

     

    • 195mm Mount Support
    • 330mm - 12.8"
    • 125mm Max Wheel Size

     

  • The Bont 3PF Midpoint addition makes a 2pt mount boot respond like a 3pt. Outdoors, the 3 point mount delivers more power to the ground. But indoors on a banked track, skaters typically like a little flex to allow the frame to turn better. One option is to have two pairs of skates. 3 point for outdoors and 2 point for indoors. Another solution is to skate with a removable middle mount that you can use when you need it. Thus..the Bont 3PF Midpoint was created.

Luigino Inline Speed Skate Frames

  • Pilot Fighter 7050 Aluminum Skate Frames are created with every bit of speed-enhancing know-how available to produce the fastest frames Luigino has ever made. Constructed using 7050 T6 extruded material, the Pilot Fighter frames can help you obtain top speed quicker by promoting more flex forgiveness with faster returning ultra-thin side walls. 

    • 12.0" 4x100mm ; 165 or 195 Mount
    • 12.9" 3x110, 1x100mm ; 195 Mount
    • 13.2" 4x110mm ; 195 Mount
  • Don't fix what ain't broke - but you can make it look different. The Luigino P51 Featherweight Frames are back this year with a Gun Metal finish, giving it that added flair to coordinate with any boots. Increased strength through design and materials, the recessed window has been removed on the P51 frames, unlike other Luigino frames, which adds strength to the arch to reinforce strong points for improved stability and power transfer.

  • Luigino Pilot Striker Frames are a great performing frame that won't break the bank. Made with a double void extrusion, these frames are designed with thin wall construction to reduce weight, but with expanded wall widths to increase strength. The Pilot Striker Frames are made to perform no matter what your skill level is.

    • 10.5" 3x110mm ; 165 Mount
    • 10.6" 4x84mm ;  150 or 165 Mount
    • 11.5" 3x110mm ; 165 or 195 Mount
    • 11.6" 4x90mm ;  165 or 195 Mount
    • 12.0" 4x100mm ;  165 or 195 Mount
    • 13.2" 4x110mm ;  195 Mount 

Mota Frames

  • Mota BOSS Inline Frames are made of 7075 extruded aircraft aluminum alloy, laser-etched and machined to perfection. Offered in many different sizes and wheel configurations to accomodate a variety of skating styles and needs.

    • 12.0" 4x100mm 165 or 195 Mount
    • 12.8" 3x125mm 165 or 195 Mount
    • 12.8" 4x100mm 195 Mount 
    • 13.2" 4x110mm 195 Mount

Powerslide Inline Skate Frames

  • Powerslide Vi Carbon 2.0 Frames were developed in close collaboration with the Powerslide race team. A perfect blend of stiff and reactive, made from 100% carbon fiber. This second generation Vi Carbon frame drastically reduced the mounting deck height which increased stiffness across the frame.

    • 195mm Mount
    • 13.2" 4x110mm
  • The Powerslide Megacruiser Pro frames allow you to pimp out any 165mm mount boot with 3x125mm frames. You'll fall in love with the speed and agility, whether cruising the city or doing extended training. Big wheels aren't just for speed skater anymore. 3-wheel frames make skating 125mm wheels easier by using a frame just 10.2" long. 

    • 165mm Mount
    • 10.2" 3x125mm
  • The Powerslide Megacruiser Frame Set enables you to outfit your skate boots for the future of skating! The 3-wheel setup provides many of the high speed aspects of the 4x110mm setups, but with better agility and less weight.

    • 165mm Mount
    • 10.0" 3x125mm
  • There is a Powerslide X Inline Speed Skate Frame for everyone. 6061 aircraft aluminum provides good stiffness and response, but at a price point that remains affordable.

    • 10.00" 165mm 4x84 or 3x100
    • 10.80" 165mm 4x90 or 3x100
    • 12.00" 195mm 4x100
    • 12.80" 195mm 4x100
    • 13.20" 195mm 4x110

     

    Colors: 5
  • The Powerslide Triple X3 Speed Skate Frames use single sided torx head axles with first class laser prints. The torx head advantage is that they do not strip easily. CNC cuts are placed in the front and rear mounting blocks to fit Pitch & Stride Control inserts. Best suited for skaters liking super stiff and responsive frames.

    • 195mm Mount
    • 12.6" 3x125mm
    • 12.8" 3x110, 1x100
    • 12.8" 4x100 or 105mm
    • 13.2" 4x110m
  • The Powerslide Triple X3 Speed Skate Frames use single sided torx head axles with first class laser prints. The torx head advantage is that they do not strip easily. CNC cuts are placed in the front and rear mounting blocks to fit Pitch & Stride Control inserts. Best suited for skaters liking super stiff and responsive frames.

    • 195mm Mount
    • 12.6" 3x125mm
    • 12.8" 3x110, 1x100
    • 12.8" 4x100 or 105mm
    • 13.2" 4x110m

     

  • The Powerslide Vi Frames are made of 7005 Series Aluminum. CNC machined to perfection, these single axle frames are laser printed and very stiff. Newest is the 3x125mm frames, but also available in more traditional 4x100 and 4x110s setups. 

    • 11.8" 3x125mm ; 165 or 195 Mount
    • 12.2" 3x125mm ; 195 Mount
    • 12.6" 3x125mm ; 195 Mount
    • 12.4" 4x100mm ; 165 or 195 Mount
    • 13.2" 4x110mm ; 195 Mount
  • The Powerslide Beta Inline Freestyle FSK Frames is a freeskate frame designed for those that want the best bang for their buck! The double void construction enhances stiffness, and the frame is mounted at 165mm mount spacing with Powerslide's unique X-Slot capability.

    • 165mm Mount
    • 231mm 4x76mm
    • 243mm 4x80mm
  • Stride control frame inserts help you adust to the perfect angle between the frame and the boot for a longer push, to help get in the correct skating position or offset bad foot position.  The tilt works to help correct pronation or supination (ankle roll) while pitch will  help you get weight on the balls of your feet (or lay back).   

    • Designed for Powerslide Frames Only

     

    Colors: 2

Rollerblade Frames

  • The Rollerblade Twister Pro 243mm Frames are the same frames found on the 2015 RB Twister Pro skates. Designed to provide the perfect balance between control and maneuverability. They are stiff, ight weight and have good response to perform well for urban, freestyle/slalom, or skating just for just fun.

    • 165mm Mount
    • 243mm 4x80mm
  • The Rollerblade UFS 84mm Skate frames mount UFS. They will NOT work for 165 or 195 mount spacing. UFS mounting is most commonly found on aggressive skates, so these allow for those skaters to mount a frame that allows for larger wheels. Some urban skates from Rollerblade and K2 also use the UFS mount. Made of aircraft aluminum for increased strength and rigidity, providing maximum durability and control.

    • UFS Mount
    • 4x84mm

Seba Skate Frames

  • The Seba 310 3x110mm Inline Skate Frames are Seba's 110mm option for 3-wheel skating and is a great choice for anyone that wants a 3x110mm wheel setup. This frame can be mounted multiple ways to support many boot models and due to the short frame length, expect a balance of maneuverability and speed.

     

    • 150 / 165 / 180mm Mount Support
    • 248mm Length
    • 110mm Max Wheel Size
  • Seba 325 frames are 3x125mm. They provide the benefits of large wheels without limiting the skaters agility. Extruded aluminum frames with more cuts then the 110mm help reduce the weight without affecting stability. Supports all common mount spacing setups.

     

    • 150 / 165 / 180mm / 195mm Mount Support
    • 266mm / Approximately 10.5"
    • 125mm Max Wheel Size

     

     

  • The Seba Deluxe Rockered frames are recognized as one of the best freestyle skating frames on the market. Light and stiff to make all your moves precise.

     

    • This frame is pre-rockered, you can have a banana setup with 8 wheels of the same size.
    • 165mm Mount Support Only
    • Medium / 231mm / 4x76mm
    • Large / 243mm / 4x80mm
    Colors: 1
  • The Seba Deluxe Frames are a top choice among slalom and freestyle skaters. Tubular cross-braces address the weakest point of the frames to withstand the demands of slalom and freestyle skating.

     

    • Color and size availability may vary
    • 150 / 165 / 180mm Mount Support
    • 219mm / Max 72mm
    • 231mm / Max 76mm
    • 243mm / Max 80mm
    • 255mm / Max 84mm
    • 273mm / Max 90mm

     

    Colors: 4
  • The Seba R1 Inline Skate Frames are the classic designed frames found on popular FR1, FR2, and Trix 2 skates from 2015, as well as 2016 FR2 skates. They are lighter and stiffer than the X Series frames, providing better response and control. 

     

    • 150mm, 165mm, and 180mm Mount Support
    • 231mm / 4x76mm
    • 243mm / 4x80mm
  • The Seba Deluxe UFS Inline Skate Frames are a top choice amongst slalom and freestyle skaters that want to convert UFS enabled aggressive boots in to fully functional slalom, freestyle, or dance style skates.

     

    • UFS Mounting Only
    • 243mm Frame Length
    • Max Wheel Size: 80mm

Bont Inline Skate Laces

Luigino Inline Skate Laces

Seba Skate Laces

Liners

  • The Powerslide MyFit 2nd Skin Liner is one of the best options for inline skaters looking to replace their liners and add better comfort and performance capabilities. The 2nd Skin Liner can be heat-moulded to contour to specific foot shape which will improve the power transfer and fit in any skate that can accept a separate liner.

  • The Powerslide Fat Boy Heat Moldable Skate Liners are part of Powerslide's MyFit liners catalog and are a terrific choice for anyone that needs to replace their liners, or wanting a better liner then what they already have. This liner has a low volume in the front and medium heel volume, providing a nice snug fit that improves performance all around.

  • The Rollerblade Twister Pro Inline Skate Liners are the Specialized 5-Star PRO Fit liners as found in the Twister Pro, Twister LE, and other high-end Rollerblade Urban skates. It will fit Twister and Maxxum series Rollerblade skates easily. 

  • The Blank Liners can now be used in (almost) any skate! First found in Rollerblades Solo Rob G Skates, the Blank Liner embodies the creativity of street skating. You can customize the liner with your own graphics and images and the liner is walkable, meaning you can take it out and sport it like a stylish sneaker as it has a rubber sole.

  • The Blank Solo Aggressive Skate Liners are a mainstay in the aggressive market not just for their comfort, but their (almost) bulletproof durability. V-Cut cuff, reinforced lace loops, and separate, independent lacing, all combine to provide one of the best skate liners from the number one inline skate manufacturer, Rollerblade.

    • Walkable and useable as a shoe for most applications and situations
  • Jug liners received a complete makeover in the new Black Sox liner. Featuring a new dual density foam which consists of a high density EVA foam on the outside to provide support and distribute stress over a wider area. A softer inner PU foam adapts to the contours of your foot enhancing fit and comfort. The padding of the tongue was increased to almost 1” and it comes with a removable tongue insert with a hidden pocket. New is also a V-shape elastic insert in the back which provides flex if skated with V-cut cuffs.

Back To Top